*SCAM ALERT* neoBOX open source Focbox variant (HW 4 and HW6 Design)

[wandagoner]

to save some time for others to search here is my summary. assuming its correct perhaps Tobias @Schulerbible or Bill @BillGordon can edit the topic to include these details

@jeffwuneo is working on (4) different ESC variants to be released in the near future. https://focbox.com/. These efforts began Nov2019. No devices have been released for community testing or GA at this time

Key take aways

@jeffwuneo

Is not job for me. Is fun project I spending some time on. Is not for money. I no need do this for my company already make very successful for making car and design.

@jeffwuneo

For me I don’t needing to do this for business so is ok to just covering cost.

@jeffwuneo

I no ask for you advice. Please stop post to my thread.

14Jan2020:

@jeffwuneo

Because spring Festival is start this week, we cannot finishing neoBOX before. So we can finishing after around February 8-10th.

2Dec2019:

@jeffwuneo

Hello friend. We start SMT process for both V4 and V6 hardware and we need some tester. We have 8 pcs of each for testing.

Because is test unit we need gather feedback. Price is $80 for each V4 hardware and $120 for V6, but I replace with production unit once test finish if need changing any.

---

NeoBox

v4

@jeffwuneo

For V4 is 4.12HW compatible. For V6 is HW6 compatible.

@jeffwuneo

It was 1.6, but we fix this already.

@jeffwuneo

I need updating 3D model. We use USB C.

dim: 65x65x22
voltage: 60v
cont current: 70a
peak current: 150a
Conductor: 12awg silicone wire for power and phase
Connectors: XT60 soldered for power, phase cables is just wire
phase connectors: 4mm bullet plug and 12awg silicon wire

v6

@jeffwuneo

We make V6 hardware with automotive grade and use special PCB material design for 270C. Is design for reliable.

dim: 65x65x22
voltage: 60v
cont current: 80a
peak current: 200a
Conductor: 12awg silicone wire for power and phase
Connectors: XT60 soldered for power, phase cables is just wire
phase connectors: 4mm bullet plug and 12awg silicon wire

@jeffwuneo

About this design we want keeping same but make some small improve for make more reliable. We make capacitor change and other small change which stop some problem about before. We make sure component is automotive grade part so can lasting long. We apply conformal coat to pcb also for protecting.

@jeffwuneo

I need updating 3D model. We use USB C.

Dual v6

@jeffwuneo

Our neoBOXv6 Dual will have switch inbuild and can handling 160-200A continous current for 12S. We release this after spring festival end of February for $249.99

@jeffwuneo

Is should be 110x65

Dual V6 Variant
It can handling more than 100A. For size I not sure final size yet. Maybe 150 x 60 but not final.

20s Variant

@jeffwuneo

For current we work for 150A continuous at 20S.

@jeffwuneo

We already make our own new esc design but is not ready yet. Is not based off vesc.

This we make design better and release all file when we finishing.

This text will be hidden

Images

https://esk8-news-objects.s3.dualstack.us-east-1.amazonaws.com/uploads/optimized/3X/7/b/7b2fffd5e09c3ed15e17a712e6aea8f21ac38ab8_2_1294x1000.jpeg

https://esk8-news-objects.s3.dualstack.us-east-1.amazonaws.com/uploads/optimized/3X/8/2/827fb565b3ddaafcf0e46e8f98307bf5b056c29f_2_1238x1000.png

https://esk8-news-objects.s3.dualstack.us-east-1.amazonaws.com/uploads/original/3X/d/a/da0acd3383c41c3bce257bfdf18560fd185297a1.jpeg