🏆 2022 Build of the Year - Nominations

[PedroMcJimenez]

@rosco

I’m still not sure about naming my builds

My vote is “Big Mac’s” after the beer that fueled the build

[magharees]

The Batt deserves this alone

[rusins]

I’ll pick the Street build category, and this picture for my build:

Bussin Sportster | DIY take an on Onsra

[Savage1]

Street for me. Use the best pics you feel are good. I will also donate a set of @glyphiks antisink plates , (yet to come) to the winner.

[mr.shiteside]

I assume we couldn’t squeeze this past our feathery overlord given it’s a bolt or two short of a lap time?

Arythmia 4WD - Boundmotor Octopus

[20221226_231933] Loose fitting now complete, awaiting a few parts such as titanium mounting bolts etc and still need the antisparks wired in. These builds take forever with only a few hours a day with which to further the project between kids and running a bar, there’s precious little time left over. Amusingly, I cocked up the final shortening of phase wires and sensor wires… that aside. I’m pretty happy how the cable arrangement has worked, needs a few more hours of heat shrink and general…

Similarly sneaky but this monstrosity was also revamped in 2022? I feel like this actually was built this year

HummerBoard - 4WD HoverBoard hub motors and motherboards

Hi, been making a 4WD e-mountainboard with hardware from offroad hoverboards. Here are the specs: Battery 12S (3x4s) Lipo 20Ah 2 hoverboard motherboards (reprogrammed) 4 all terrain hoverboard hub motors (8inches) Power: 6KWatts in silence Lights: front and rear VMax: 50km/h Range: 20km DIY mudguards (PVC tube and metal frame). [image]

Ok there’s no fuckery with this one

Backfire Ranger X1, a re-build.

Hi Guys, This is the re-building of a Backfire Ranger X1, one from the first batch in the Indigogo campaign back in 2018, though delivered early 2019. This was my first ESK8 and I was super excited about finally getting one. I’m knocking 50 and used to skate in the late 70’s as a kid. But really the 80’s was my skate era. In the late eighties I saw my first powered skate board, a local guy had connected an RC nitro engine to a home cooked live axel truck. Quite fast, lots of noise, no brakes…

And this little guy for the amount of craft and interesting ideas, especially dem wheels and big ol’ lipo pouches

Rat | Kicktail | 6S1P | Dual 6354 | Mini Foc+ | DIY Wheels

This is a build thread of my latest board. I call it Rat . I thought I might share it with you all. Story My first eskate below was a lot of fun. It was not perfect but it sure put a smile on my face. Sadly it’s parts gave up on me many times. [PopPic00007] Last year I built something else. This board is super sweet although it is far from practical. I can’t carry it with one hand, doesn’t turn quick enough and it is a pain to carry up/down my 3 floors. [IMG_5689] So that is why I h…

[bboybowzer]

One day I’ll build something above average

[Linny]

Street build! There are nicer pics on post #27 of my build thread, thanks!

[JesseM]

@mr.shiteside thanks for the nom man, if it does scrape through, im tipping street is the prinary design focus though im sure it’ll end up on both regularly… if its not eligible, i guess itll have to wait for the 2023 noms.

Pretty chuffed for a first build to even be considered here amoungst some very talented builders and sexy decks.

Edit: on reflection and 4 hours creating more problems than i solved, i must politely decline this round, its clear to me that the story isnt yet over , if i didnt ride it by new year… it hasnt yet been charged…

Thanks for the consideration tho

[BenjaminF]

@mr.shiteside

I assume we couldn’t squeeze this past our feathery overlord given it’s a bolt or two short of a lap time?

I dont know what the fuck any of this means, but you posted it at 14:45 on the 15th so these nominations are fair game

@the2jakes @moog @Fatglottis I need to hear from y’all in the next couple of hours about which category you want to compete in, or you will not be entered into the voting.

@JesseM

on reflection and 4 hours creating more problems than i solved, i must politely decline this round, its clear to me that the story isnt yet over , if i didnt ride it by new year… it hasnt yet been charged…

Yeah that seems like the right call, I respect that decision.

[BenjaminF]

@b264

Is it limited to one glamour shot?

One glamour shot, just like all the previous BOTY voting threads.

@b264

If it’s limited to one and someone submits four, do you just select one of the three with no whining permitted?

If it’s limited to one and someone submits four, I slowly lower them into an active volcano via a winch attached to their nipples. Unless I think they might enjoy that, in which case I just mock them publicly.

[mr.shiteside]

@BenjaminF

@mr.shiteside

I assume we couldn’t squeeze this past our feathery overlord given it’s a bolt or two short of a lap time?

I dont know what the fuck any of this means, but you posted it at 14:45 on the 15th so these nominations are fair game

Hahahahaha sorry, I meant the board isn’t technically finished. Couple of bolts left before it takes its first run. And hummerboard v1 was built in a previous year but v3 was this year

[Fatglottis]

@BenjaminF

I need to hear from y’all in the next couple of hours about which category you want to compete in

Omg I can’t believe this is happening

Put me up under Esk8 Innovation then

[janpom]

Since my suggestion on adding a new category doesn’t seem to have been accepted , I guess I’ll try my luck in Esk8 Innovation. Cheers!

[BenjaminF]

2022 Build of the Year - Voting

What’s up all you party people?! Happy 2023, BOTY is hear! [BOTY 2022] Things are a little different this year - DONT PANIC: After last year’s successful debut of categories, we are tweaking things a bit in an attempt to refine the format. The rules for voting this year are: The builds have been nominated, and the builders have selected the category they want their build to compete in. Each build is only competing in one category. Voting will happen in one round (unlike last year’s tw…

Voting is live