Shop currently empty…
possibly more to come
The List w/ Pricing
| # | item | cond | price |
|---|---|---|---|
| 88 | more to come … |
16 Likes
Sold 1 - 25
| # | item | cond | price |
|---|---|---|---|
| 1 | DieBieMS batch 3, | new | |
| 2 | @IDEA v7 motor mounts with idlers for MBS matrix II | new | |
| 3 | @IDEA 72T wheel pulleys with MBS hole pattern | new | |
| 4 | 12s BMS pulled from mboard battery  |
used | |
| 5 | 12s Lacroix Lonestar BMS (OG) | used | |
| 6 | Pair of Boosted Motors for repair. wobbly shafts. | needs service | |
| 7 | 2x Lacroix Stormcore 100D | used | $325ea shipped (US) |
| 8 | EnertionUSA Unity (no blood) | new | $300 shipped (US) |
| 9 | Nano remote and receiver | used | $0 + shipping (or $5) (US) |
| 10 | Enertion Nano remote and receiver | used | $0 + shipping (or $5) (US) |
| 11 | Land Surf HammerHead Remote (enertion nano guts) | used | |
| 12 | MBS Matrix II truck, + bonus hangar | used | $35 shipped (US) |
| 13 | Stooge SRB 3-link trucks w/ new axels and extra motor mounts | used | $295 shipped (US) |
| 14 | 2.4ghz mini remote and receiver | new | |
| 15 | HTD-15-5 Belts!! | new | |
| 17 | set of 2 MBS rockstar hubs | new |   |
| 18 | Land Surf Axle Nuts V1 M12 Black x4 | new | |
| 19 | Land Surf Deez Nuts V2 M12 Black x4 | used | |
| 20 | Land Surf Axle Nuts V1 M12 Red x4 | used | |
| 21 | Land Surf Axle Nuts V2 M12 Red x3 | used | |
| 22 | YZPower-450 12s 6A charger | new | $44 shipped (US) |
| 23 | Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft | new | |
| 24 | Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft | new | |
| 25 | Redember Northcamp and @BigBen Enclosure | new |   $351 shipped (US) |
show me the sold stuff
#1 DieBieBMS
#2 @IDEA v7 MBS motor mounts with idlers
#3 @IDEA 72T wheel pulleys
#4 12s mboard bms
#5 12s BMS, lacroix lonestar
#6 pair of boosted motors, need service, wobbly shaft
#7 Lacroix Stormcore 100d (x2)
Update, these are apparently an early batch stormcore. (first batch?) No 100D marking on the sides. no version info on the pcb. be aware of this. first one was stress tested by the buyer. said it was good.
Note just the stormcore what you see in the pics. I don’t have the power buttons to go with em.
I got these from a PEV company that was trying them for use in their PEVs I think they went another direction. I was keeping them for an HV awd build, but… i have shown not to build things so they are available to someone who needs them more than me.
#8 EnertionUSA Unity
New, opened box. I got these from EnertionUSA for a yet another build i seem to never get to, I opened the box to ensure they worked. I did motor detection with them and that’s it. put it all away in the box after. not sure i want to sell them but they are available if someone needs them now more than me.
#9 Nano Remote and Receiver
#10 Enertion Nano Remote and Receiver
Note: this one is failing to charge. red light flashes fast. I suspect that means battery is bad. Pick it up with one of the other ones as spare guts… or replace the battery.
comes with receiver which I just tested today it works.
#11 Land Surf HammerHead remote and tranceiver.
Note the charge light on this one never worked after the mod. it charges but the red light doesn’t come on while charging.
This is a 3d printed case mod for the Nano remote guts. Designed by Land Surf.
this one has enertion nano remote guts.
i really liked this one. but without a trigger guard i bumped it too frequently.
#12 MBS Truck, extra hangar, risers.
MBS truck + 2nd truck free only missing toptruck/baseplate.
1 hangar srapped concrete, see pics.
replacement washers and nuts are not black. see pics.
#13 Stooge Race Boards (SRB) 3-link trucks
Standard 3-link trucks, (non HD)
the axels are brand new unused.
motor plates are 30mm spacing. ( i ran 44mm spaced motors diagonally )
include second set of motor plates and cross bar. these are the smaller ones that mainly work with the stooge gear drives.
#14 2.4ghz mini remote and receiver
bought this to play with the classic esk8 remote. didn’t get around to it. never used it.
#15 HTD-15-5 Belts POWGE
I figure i see people randomly looking for a quick belt and i have a bunch “in stock” might as well list them in case it helps.
| length | width | pitch | qty | |
|---|---|---|---|---|
| 365 | 15 | 5 | 5 | |
| 370 | 15 | 5 | 4 | |
| 405 | 15 | 5 | 6 | |
| 440 | 15 | 5 | 4 | |
| 435 | 15 | 5 | 1 | |
| 445 | 15 | 5 | 12 | |
| 470 | 15 | 5 | 5 |
#17 Set of 2 MBS rockstar II hubs new. (sans bolts)
These were never used.
Now with bolts.
#18 Land Surf Axle Nuts V1 M12 Black x4 (new)
#19 Land Surf Deez Nuts V2 M12 Black x4
#20 Land Surf Axle Nuts V1 M12 Red x4
#21 Land Surf Axle Nuts V2 M12 Red x3
NOTE I lost one of these. so there’s only 3
#22 YZPower-450 12s 6A charger
has a dc5.5 connector. but you can put whatever you need on it.
#23 Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft
#24 Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft
#25 Redember Northcamp and @BigBen Enclosure (new)
sadly never got around to building this.
it was listed… then I delisted it… to build it hopefully. now it’s relisted
it’'s now gotten a few scuffs from being moved around. see pictures on blue towel which are the recent ones.
enclosure is about 9 x 9 in 21700 p42as doublestack.
66cm x 19cm x 5cm
The smallest battery you’d do is probably 14s8p and if you’re good at packing and move the ESCs to the outside 18s9p
see more pics section.
size:
- It’s 47" from tip to tip.
- the dropdeck area / standing platform
- 29" not including the drops
- 35" including the drops
- 11.5" wide.
2 Likes
Sold 26 - 50
| # | item | cond | price |
|---|---|---|---|
| 26 | FreeSK8 OSRR Bruce and receiver | used | |
| 27 | Metr Pro Unity | used | |
| 28 | Moon Drive mounts for MBS Matrix II | used | |
| 29 | SRB 30mm Standard motor plates | used | |
| 30 | Pair of Lacroix 20T Titanium pulleys 10mm bore | used | |
| 31 | Pair of 15T Aluminum Pulleys 10mm bore | used | |
| 32 | Pair of SRB 78T Spur Gears | used | $65 shipped (US) |
| 33 | Freesk8 Xenigotchi / Robogotchi + GPS | used | |
| 34 | set of 4x MBS rockstar hubs + 2x 62T pulleys | used | |
| 35 | DaveGA (Xcell branded) | new | |
| 36 | Freesk8 OSRR Albert and Receiver, Unobtainium. | used | $300 shipped |
| 37 | Enertion USA Focbox Unity (No Blood) | new | |
| 38 | 2x 1x Daly 12s BMS | new | |
| 39 | Dual Escape ESC | used | |
| 40 | batwing puck remote (sans rx) | used | |
| 41 | MJF Poastmote puck remote (sans rx) | used | |
| 42 | Mini Puck (nug puck?) remote (sans rx) | used | |
| 43 | nylon puck shell, Midnight (Lacroix) | used | |
| 44 | nylon puck shell, Midnight | used | |
| 45 | Hoyt puck Receiver (rx) | used | |
| 45 | Subsonic GT40 w/ eBoosted Enclosure | used (newish) | |
| 46 | nylon puck shell, ICE/Clear | very used | |
| 47 | Left foot MBS binding | new | |
| 48 | FreeSK8 Xenigotchi (Robogotchi) and GPS | used | |
| 49 | Pair of moon drive 44T spur gears | new | |
| 50 | Oil Slick MBS Matrix II + Moon Drives + lacroix bushings | used |
show me the sold stuff
#26 FreeSK8 OSRR Bruce and receiver
For reasons related to my builds and my time to mess with things, I haven’t been using this unobtanium remote. So it should go to someone else who will.
Also it’s too big for my gloved hands. Smaller models were supposed to arrive someday.
#27 Metr Pro Unity
This metr pro fits neatly in the unity/xenity. but with the right skills an adapter cable can plug it into any vesc.
#28 Moon Drive mounts for MBS Matrix II trucks
#29 SRB 30mm Standard motor plates
Not purty but fine with some cleanup and paint. no cross bar included.
for standard axle not HD.
#30 Pair of Lacroix 20T Titanium pulleys
20T
10mm bore
w/ keyway
Note! these do not have holes for grub screws, lacroix held them in place with circlips.
sry they have not been cleaned up. 
#31 Pair of 15T Aluminum Pulleys
15T
10mm bore
w/ keyway
#32 Pair of SRB 78T Spur Gears
#33 Freesk8 Xenigotchi / Robogotchi + GPS
Sold out everywhere! 
Xenigotchi automatic always on data logging, and bluetooth dongle.
Designed to fit neatly in the BKB Xenith or the Foxbox Unity, (or shudder the tenka)
with the right cable it could also be used with any vesc.
Includes the separately sold gps module and unused gps case.
#34 set of 4x MBS rockstar II hubs, + 2x 62T pulleys used
4x hubs, 2x 62T lacroix pulleys. (using 13mm spacers on 55mm bolts)
#35 DaveGA (Xcell branded)
Listing this on behalf of @DEEIF
I powered it on and it booted up and connected to a vesc. (see vid in details)
comes with a few extra bits and bobs, see photos.
#36 Freesk8 OSRR Albert and Receiver Unobtainium
Again, listing on behalf of @DEEIF
includes 1 receiver.
Note the remote originally had a tall thumb pad on the trigger. This fell off. Since I didn’t like the extra height I used it without this pad. The pad got lost. so it’s not included. look close at the photos to see what i mean.
#37 Enertion USA Focbox Unity (No Blood)
New, opened box. I got this from EnertionUSA, so it’s not a blood unity. I opened the box to ensure it worked, and also to take pics. I did motor detection with them and that’s it. box has taken some wear (see pics)
This is my spare because two of my boards still run this. but on the chance someone else needs it, i figured i’d list it.
#38 2x Daly 12s BMS
more stuff i never got around to using.
#39 Dual Escape ESC on Heatsink
More ESCs i never got around to using. Not sure if I want to sell this one or use it for it’s historical awesomeness. but if someone’s gonna use it. that’s better than me sitting on it.
#40 batwing puck remote (sans rx)
#41 MJF Poastmote puck remote (sans rx)
#42 Mini Puck (nug puck?) remote (sans rx)
NOTE: the T-button was made functional by me by clearancing the button hole. and it was over done. see the video in “more photos” section.
I’m not sure if this is actually the nug puck, i can’t identify which case this is. it’s a 4 button variant of something that looks like the 3 button nug puck. It’s very small and nice in the bare hand.
#43 nylon puck shell, Midnight (Lacroix)
This shell came of a lacroix puck so it says it on the back. (see more pics)
#44 nylon puck shell, Midnight
this thing was new. but looks like it got scratched up hanging around doing nothing. so… “used”
#45 Hoyt puck Receiver (rx)
#45 Subsonic GT40 w/ eBoosted Enclosure
Used, but newish. was never used, but has a small shipping blem on upper rail.
and both board and enclosure have some scuffs from shuffling around being stored.
Please see “more pictures”
Includes gasket and inserts, bolts.
Inserts were installed by subsonic.
gasket was cut by subsonic.
was $415 new.
#46 nylon puck shell, ICE/Clear
NOTE: See the “more pics” this has some kinda glue residue or something on it, maybe it’ll clean up, but idk, it seems like it’s part of things now. it would all hide under any kinda grip you add to the edges. there’s grip bits that probably will come off.
#47 Left foot MBS binding
#48 FreeSK8 Xenigotchi (Robogotchi) and GPS
Xenigotchi is plugs right into a unity or xenith ESC. or you can add your own cable to plug into another uart port of any other ESC.
#49 Pair of moon drive 44T spur gears
#50 Oil Slick MBS Matrix II + lacroix bushings + free moon drive bits.
solidly used.
Matrix II trucks include modified bushing plate and gubs screws to accomodate riptide bushings for lacroix hypertrucks.
not pictured:
- I will include new flange bushigns for the matrix IIs.
- 2 extra pairs of riptide/lacroix bushings white/green. (blue/yelllow currently installed)
!!!NOTE!!! I went to sell theses and i have lost the pinions for the moon drives. so. i’m dropping the price a bunch more.
Moon drives are Gen 1 MD case, with Gen 4 POM 44 T gears and 12T pinions (fairly sure. I’m not opening to validate used with 6" tires on 12s board 190kv motors. ) Includes spare 44T gen 3 gear.
These were running well for me for a long time, I took em off to test Tito’s trucks w/boadnamic gears. again note that they do not include the pinions as I seem to have lost them.
1 Like
Sold 51 - 74
| # | item | cond | price |
|---|---|---|---|
| 51 | set of 11T 12T and 14T Mod 2 (Moon Drive) Pinions (8mm shaft) | mixed | |
| 52 | Drive Train, 3ds mini gear drive 1:2.8, Fatboy hangers, Abec 11 107 superfly | used | |
| 53 | Z.Mote Trigger with Torch option | used (barely) | |
| 54 | @Savage1 prototype boardnamics clamps for SRB HD axle | new | |
| 55 | Boardnamic M1-AT clamps for SRB HD axles | new | |
| 56 | @surfnacho InfinitySink Universal ESC Heatsink | new | |
| 57 | MBS F5 binding. Left foot. | used | |
| 58 | motor bolt 40mm to 30mm adapter | used | $20 shipped (US) |
| 59 | Freesk8 OSRR Receiver (Unobtanium) | used | $50 shipped (US) |
| 61 | Apex Air Trucks. Unobtanium! | new | $299 shipped (US) |
| 60 | MBS bushings | used | free + |
| 62 | Freesk8 GPS module 1.25 | used | $20 shipped |
| 63 | Freesk8 Xenigochi + GPS 1.25 module | used | |
| 64 | Pair of Little Focer ESCs hw v3.0 | new | |
| 65 | Focbox Unity #2 | used | |
| 65b | Foxcbox Unity #3 | used | |
| 66 | Stormcore 100D+ (Unobtanium) | used | |
| 67 | Apex Jump Drives (Unobtanium!) | new | |
| 68 | Pair of Torqueboards ESC + InfinitySink | used | |
| 69 | XCELL™ APOLLO™ XT Wide wheels and tires. set of 4 | used | |
| 71 | Spintend 75/100 dual ESC | new | |
| 72 | Kaly DS 18650/21700 Enclosure | new | $98.00 shipped (US) |
| 73 | Kaly Deck XL 2.0 pre 2021 | used (good condition) | $299 shipped (US) |
| 74 | 12s4p molicel Duck battery, Enclosure and BMS | used (barely) | $169 + shipping |
show me the sold stuff
#51 set of 11T 12T and 14T Mod 2 (Moon Drive)
2 pair 12T used.
2 pair 11T barely used.
2 pair 14T new.
8mm shafts
#52 Drive Train, 3ds mini gear drive 1:2.8, Fatboy hangers, Abec 11 107 superfly
3dservisas Mini gear drive (just did a service with new grease) 1:2.8 ratio
2x230 hangers FatBoy cnc
2x caliber 2 baseplate with riptide bushings and pivots (rear 44 and front 50)
4x Abec11 107mm superfly wheels
NOTE*: i overheated one of the motors with a heat gun trying to get a case screw to unloctite and dislodged a magnet. lame
so listing is for 1 motor.. and one.. borked motor. which maybe if you’re into ti you could reepoxy and fix.
1x6374 motors 220kv
#53 Z.Mote Trigger with Torch option
Z.Mote with torch option
Unfortunately this thing just didn’t fit my hand properly. (small hands) Otherwise I really liked it.
Kaman offered to print me som mod’d triggers to try to work it out. But I just don’t have time to take him up on it.
So.. rather than it sit around. it needs to go.
#54 @Savage1 prototype boardnamics clamps for SRB HD axle
These were produced in a small batch by @savage1 designed to help attach the boardnamic SRB clamp to the axle.
I never got around to trying that experiment as my boardnamic GD got sniped for a different purpose.
#55 Boardnamic M1-AT “clamps” for SRB HD axles
these are stock from boardnamics.
requires a jam nut to “clamp”. but see #54 above to add actual clamping.
#56 @surfnacho InfinitySink Universal ESC Heatsink
#57 MBS F5 binding. Left foot.
I knew i had another one of these somewhere. found it today searching for pinions. 
#58 motor bolt 40mm to 30mm adapter
bolts to a motor with 40mm bolt pattern allowing it to fit in motor mounts with a 30mm bolt patten.
#59 Freesk8 OSRR Receiver (Unobtanium)
I knew i had one spare somewhere. Also found this digging through stuff looking for pinions. yay.
Does not include GPS or GPS cable.
Includes partial cable connector on receiver end only. see “more pics”
#61 Apex Air Trucks. Unobtanium!
#60 MBS bushings
just need shipping to get these to whomever might want 'em.
can add em on free to anything else too.
#62 Freesk8 GPS module 1.25
#63 Freesk8 Xenigochi + GPS 1.25 module
note this has version 1.25 of the gps module.
and v1.5 of the xenigotchi, tho it has a larger gps connector than other v1.5 i’ve seen.
xenigotchi, gps, cable, case and bolts included
#64 Pair of Little Focer ESCs hw v3.0
#65 Focbox Unity #2
xt90 power and 4mm bullets. power button included.
#65b Focbox unity #3
note
- has 3.5mm bullets instead of the usual 4mm.
- xt90
- does not include box or power button.
#66 Stormcore 100D+
#67 Apex Jump Drives 
Unobtanium
#68 Pair of Torqueboards ESC + InfinitySink
#69 XCELL™ APOLLO™ XT Wide wheels and tires. set of 4
Note
- these currently have bearings in them for 10mm axles. If you have 10mm axles you’ll need your own bearings.
- 10 of the 20 bolts are 50mm for attaching a wheel pulley. depending on what you use you may need different lengths.
#70 SRB 78T spur gears and Bearings
note these are the older one piece style.
Bearings are for 10mm axles
#71 Spintend 75/100 dual 18s ESC
Please note this is likely an early version of Spintends “18s” variants. and it might be better to just consider it a 16S max ESC.
#72 Kaly DS 18650/21700 Enclosure
This is an eboards peru Kaly DS Enclosure.
see details on their website
This enclosure has been designed fit the Kaly XL deck
it’s new/unused but has a few scuffs from hanging around. see detailed pics
Note there are newer and older (in house) generations of Kaly Decks. This enclosure fits the newer generation
after a bit of a convo, @hoytkid identified this deck as a kaly XL2.0 pre 2021 in house version. (the O.G. decks) it’s slightly shorter than the later generations
NOTE: The eboards peru kaly DS enclosure i have listed does not fit this board. It was designed for the later generation so it is actually a bit longer.
for an enclosure that fits, @hoytkid says:
if you want an enclosure for the [og] deck you have closest one that works is eboards peru trampa enclosure
more pics and info
side view of the composite
(ignore the grip tape pulling up there. )
Note
the eboards peru enclosure seems to be a bit bigger than this deck actually is:
it does seem to line up with the dimensions of this kaly 2.0 deck
#74 12s4p molicel Duck battery, Enclosure and BMS
This thing was made 2021-02-26 by Duck Batttery Systems. AFAIK it was never used. So it has sat the entire time. all 12 cells are at ~ 3.49v
I don’t yet know how to ship a battery. so i’m hoping to sell local in L.A. CA, but I can probably figure it out if needed.
The enclosure is 27.5" by 8" wide.
Note in more pics, some scuffs on the underside of the enclosure from being moved around.
2 Likes
Ill take enertion remote and reciever
1 Like
Sold 75 - ??
| # | item | cond | price |
|---|---|---|---|
| 75 | Idea Deck Brackets 30° | used (like new) | |
| 76 | Idea Deck Brackets, Black Horizontal, 20 mm deep | used (like new) | |
| 77 | Idea Deck | used (like new) | |
| 78 | Mad Wheels (v1) | new | |
| 79 | X-Things, Anti-Sink Plates | used | $20 shipped (US) |
| 80 | Lacroix Hypertrucks, Lights, extra Bushings | used (see pics!) | |
| 81 | z.mote thumb wheel remote | used | $44 shipped (US) |
| 82 | VX1 remote | used | |
| 83 | 10s LLT smart BMS with ble dongle | new | $11.88 shipped (US) |
| 84 | 12s LLT smart BMS with ble dongle | new/used | $11.88 shipped (US) |
| 85 | box o freakin motors lacroix/maytech lonestar lacroix/proto … | used/repair | $0 + shipping (24lbs, ~$40 - $80) |
| 86 | Hoyt St ROSA Trucks (there’s a catch) | new | |
| 87 | set of 4x 13233 - MBS Rockstar II Hub - Carbon Print | used/very |
show me the sold stuff
#75 Idea Deck Brackets 30°
for idea deck system
#76 Idea Deck Brackets, Black Horizontal, 20 mm deep
for Idea Deck system
#77 Idea Deck
for Idea Deck system
not really used but may have been assembled and stood upon a few times.
It appears to be a “flex 2” deck. (measures ~10.3mm center thickness. )
Note, there’s very slight blemishing in the finish, whiter spots along the weave. not sure why.
See “more” pics for details.
#78 Mad Wheels (v1)
includes bearings for 10mm axels.
#79 X-Things, Anti-Sink Plates
#80 Lacroix Hypertrucks, Lights, extra Bushings
condition
used. They are scraped up a bit from braving a mountain trail, which turned out to be all rocks at points.
base plates
the base plates are the lonestar height ones. not the naz.
they were the anodized blue ones, painted black by prev owner which was a nice aesthetic.
bushings
They have green/red bushings in them.
there’s a brand new set of green and grey.
and a used, moded (corner rounded over) set of green and white
riptide in 2024 change the color scheme, these are old color scheme.
see attached image
unlesss you’re 90kg you don’t want the grey.. and you probably want some white, yellow, blue in the mix.
Lights
The lights use the later upgraded aluminum mounts.
I just tested that they both work. IIRC I opened them once and repaired a broken wire.
they had some preventative hotglue “strain relief” that prev owner put on there.. which is no longer doing it’s job.. and could be removed.
motor mounts
The mounts are the stock lacroix mounts that have the smaller hole pattern.
people have used radium motors designed with both hole patterns, (the ones built that way, not all of them) or used adapter plates.
more pics.. check em out.
↓↓↓↓↓↓↓↓↓
^^^^^^^^^^
#81 z.mote thumb wheel remote
z.Mote thumb wheel remote. and receiver.
I liked it for a thumb remote. I just stopped using it because it was easier to share hoyt remotes between my boards.
take note in pics
- it’s setup for pwm connection. the uart wires are there but would need extensions
- few cosmetic scuffs.
#82 VX1 remote
I used to carry this around to intro2speed as backup when people forgot their remotes.
the throttle wires have been hardened.
#83 10s LLT smart BMS with ble dongle
includes balance connector and leads,
bluetooth dongle and two thermisitors
advance:
it could be converted to 12s (or I think up to 15s) by de bridging the appropriate solder bridges and updating s count in the app, then you have to make your own balance lead. they sent me 10s instead of 12s a while back and I converted one.
#84 12s LLT smart BMS with ble dongle
BMS is new, balance connector is not. see pics
includes thermisitor, bluetooth dongle. and balanced cables (used, cut.. see more pics )
#85 box o freakin motors lacroix/maytech lonestar lacroix/proto ..
this offering for $0 + shipping is for anyone who wants to play around with either nosiy motors or fixing up motors.
5 motors from O.G. lacroix lonestar/nazare (maytech 6396?? )
4 motors from O.G. prototipo. (6374 3500w? )
all 190kv
all of them seemed to pass a cursory join the phases and turn to feel resistance.
all but 2 should spin up and work. will likely be noisy either because of bearings or motor shafts.
1 proto motor says “bad inductance”
1 lonestar otor says broken magnet.
#86 Hoyt St ROSA Trucks (there’s a catch)
Try as he might @DEEIF can’t find the motor mounts that go with these trucks..
however mboards sells the mounts
outside of that they are very nice and pretty.
#87 set of 4x 13233 - MBS Rockstar II Hub - Carbon Print
These are fully functional, but well used, the carbon print is not in the best shape. have a close look at the more pictures.
2 Likes
enertion nano, and regular nano remotes sold.
1 Like
idea pulleys sold.
drop price to 0 on hammerhead.
1 Like
boosted motors gone.
damn. so much for adding stuff every week. 
at least i sold something without even posting. box of 200 molicell p42a $800
3 Likes
dm sent
1 Like
Added 1.5 MBS trucks
2 Likes
Dm’d about trucks. 
2 Likes
MBS trucks sold. someone sniped in even before @nclayton
1 Like
Added 3-link trucks.
1 Like
Messaging you fess
2 Likes
giving away the hammerhead. updated price.
1 Like
Pm inbound
1 Like
