Looks good to me 
I check mine tonight as well… I have decided to paint It anyway 
What a sweet build.keen to see it complete!
1 Like
This is BOTY material right here, really nice attention to detail so far!
5 Likes
I added a blob to the single connection as that’s the most problematic, and hotglued the other three.
1 Like
I redid all 4 but was confused as to why i had to re-do the remote calibration in metr afterwards.
I thought it was because i pulled out the battery but i did it again to test and it didn’t fuck up the throttle this time.
1 Like
This was good.
But this is better 
** Table of contents **
* Idea / Color Scheme / Parts List
* Removing Deck Print / Installing Rear LEDs
* 100 Optical Fiber Strands / Painting Enclosure and Bottom of the Deck
* Painting Remote - Didn’t Like it - Repainted it later
* First LED PowerUp / Motors almost Finished
* Repainted Remote / Threaded inserts
* Motor wires wrap / Electronics / Glass Frit
* Photoshoot
20 Likes
U need some fancy oil slick screw to go with that
5 Likes
Exactly, but unfortunately there are no way i could find some in that size in Serbia… Maybe online. To be honest I think I’ll redo the remote. Not quite liking it as I look at it more and more…
Small update for today. I have finalised a case for the LED light for those fiber strands.
11 Likes
and that print OMG
Just had a quick stop at the workshop. Few things have been done.
Removed the paint from the other motor, and clear coated both of them. Before installing them I’ll redo the black cables wrap into something that will look better.
Installed the LED light to shine trough the fiber optic strands.
Connect 12V, let them shine and enjoy the view 
Its really hard to take pictures of it… But it looks amazing.
Also during daylight it’s clearly visible. The LED is really bright.
Tomorrow I hope I’ll finish up the battery (Balance Leads), then the rest of electronics, glass frit etc…
Almost done.
** Table of contents **
* Idea / Color Scheme / Parts List
* Removing Deck Print / Installing Rear LEDs
* 100 Optical Fiber Strands / Painting Enclosure and Bottom of the Deck
* Painting Remote - Didn’t Like it - Repainted it later
* First LED PowerUp / Motors almost Finished
* Repainted Remote / Threaded inserts
* Motor wires wrap / Electronics / Glass Frit
* Photoshoot
46 Likes
Hands down the sexiest thing I’ve seen since I last pulled my pants up. Respect, dude.
10 Likes
Really cool.
1 Like
This just looks absolutely incredible
2 Likes
BOTY BOTY BOTY BOTY BOTY
3 Likes
This is great Luka! Given me some ideas about a few bits I could do too.
5 Likes
I would never be able to do light fibre work like this, would you ever consider doing commission work?
2 Likes
Wow, coming from someone that made such a good looking decks in past… It means a lot to me! 
Awesome, I am glad if something good comes out of it… BTW that wooden @ApexBoards stand, man I can’t stress enough how practical it is… Really loving it.
Thanks guys. I really appreciate the support.
It’s really just matter of taking your time, and doing it slow. I could consider to make it for someone in future, the only requirement from my side would be that it can’t be done fast.
5 Likes
as a fellow maker I totally respect that quality work takes time.
2 Likes
we should start selling them again. Wood prices went mental for a bit but the situation has stabilised a bit
2 Likes
