ok I’m not gonna lie to you, the engraved EreTroN went into my brain as erection
7 Likes
Hahah. Not the first one who told me that
2 Likes
The day has come when the boring stuff had to be done. I think everyones nightmare here. Installing threaded inserts into the deck.
I must say that the inserts @EboardSolutions provide with Flux deck + enclosure combo are the best I have ever used. Really easy for install. It took some time, but eventually I was done.
Added some colourful cushioning bellow the cells to avoid any rattle. I love these colors.
As I said earlier, the more I looked at the painted remote I did a few days ago, the less I liked it. Decided to start over, and it was worth it. I love this solution so much more than the last one.
Also, I’ve found a company locally who accepted to make me 1m of custom lanyard. Something similar to this. It should look dope once finished. If they don’t make some shitty version of this, that is. 
But we will see.
Going along strong… Next few days should be interesting.
Cheers
** Table of contents **
* Idea / Color Scheme / Parts List
* Removing Deck Print / Installing Rear LEDs
* 100 Optical Fiber Strands / Painting Enclosure and Bottom of the Deck
* Painting Remote - Didn’t Like it - Repainted it later
* First LED PowerUp / Motors almost Finished
* Repainted Remote / Threaded inserts
* Motor wires wrap / Electronics / Glass Frit
* Photoshoot
19 Likes
I never was a huge fan of black nuts and screws on raw finality hub. Until better solution is found, I did a little 3D printed mask, painted it and added some silver nuts.
15 Likes
I love that chrome.
Nice nuts.
2 Likes
In the last few day I’ve done following:
Rope that I have ordered has finally arrived, so the remote is complete now
Put all motor wires into purple/white sleeve:
Painted enclosure gaske.
Finished up all of the electronic inside, 3M Dual Lock + White Silicone everything
It was time for a final layer of epoxy and glass frit. I stumbled upon some glitter a day before, so decided to add purple/blue glitter in the epoxy
** Table of contents **
* Idea / Color Scheme / Parts List
* Removing Deck Print / Installing Rear LEDs
* 100 Optical Fiber Strands / Painting Enclosure and Bottom of the Deck
* Painting Remote - Didn’t Like it - Repainted it later
* First LED PowerUp / Motors almost Finished
* Repainted Remote / Threaded inserts
* Motor wires wrap / Electronics / Glass Frit
* Photoshoot
19 Likes
I AM DONE!
Today I had a deal with a friend of mine to visit him in his photo studio to take some photos of the newly finished product.
Enjoy
** Table of contents **
* Idea / Color Scheme / Parts List
* Removing Deck Print / Installing Rear LEDs
* 100 Optical Fiber Strands / Painting Enclosure and Bottom of the Deck
* Painting Remote - Didn’t Like it - Repainted it later
* First LED PowerUp / Motors almost Finished
* Repainted Remote / Threaded inserts
* Motor wires wrap / Electronics / Glass Frit
* Photoshoot
45 Likes
11 Likes
3 Likes
7 Likes
I don’t care what others have to say but BOTY right here. Contest closed.
11 Likes
I am horny for this level of detail.
7 Likes
Uphill battle to beat this gem for sure.
6 Likes
It’s like one of those super cars that you own but won’t drive. Cannot have a single scratch of speck of dirt.
6 Likes
also can’t touch it without wearing gloves
6 Likes
Just saw this all over socials and wasn’t sure it was a real build! Then stumbled across it here. I’m so annoyed I’d not clicked on this thread until now 
This is just amazing!!! 
7 Likes
They call those “trailer queens” in the classic car world.
3 Likes
It’s why I wear my sunglasses at night.
2 Likes
It’s the most beautiful stick of bubble gum I’ve ever seen. 
2 Likes
Fuck build of the year, this is the flux of the damn century.
2 Likes