Oh man that is rough. I bet he had no idea.
Would you rather autoplay insta/tiktok pop music or wind mic distortion at 30mph? Tough call
1 Like
That’s not a tough call at all. 
1 Like
That’s strange, its not suppose to make any sound. For me it always been off. What browser do you use?
Firefox
I’m on FF too and I don’t have any sound. Maybe a problem with X’s add-ons?
I want to know more about them lights tho
They’re a short section of a red LED strip (10mm wide strip on the moons, 8mm wide on the jump drives as they’re so small!) with a bit of red film over it. Sat in a 3d printed thing that has a channel for the strip and wraps around the motor mount / spacer. Cables fed up inside the motor braid to the 5V adapter in the mini peli. Simple but effective! I’ll do an upgraded design as I get better at fusion and can share that
Prototype:
8 Likes
I’d compulsivelly buy that
1 Like
nope
Well, I feel like I’ve betrayed you DIY homies - because I just bought a Lacroix Jaws off FB marketplace…
The price was right and I’m pretty stoked to have a street cruiser to ride in two weeks instead of facing down 6+ months of build time.
Expect to see more items for sale soon.
12 Likes
No one is begrudging you this sweet snag. Congrats!
1 Like
Happy to oblige
1 Like
What top speed would you expect out of 6354 flipsky motors, BN dual gear drives on 85mm wheels. I’m getting to about 26mph with a 200lbs board and rider. Unloaded it’ll do 30 at 85% duty cycle. I think I’m motor heat limited, but I haven’t attached my meter. It’s 102F today.
What Kv motors and what gear/pulley ratio? What is your battery charge voltage?
12s2p p42, I had the same results at 100% and 50% charged. The motors are 190Kv.
I’m no longer sure what the ratio is. I thought it was 75/29, but the BN website also says 2.78 so… They are whatever BN helicals have been shipping in the past year.
Sounds about right for that ratio/kv/voltage/wheelsize. I’d order the 2.2 pinions if you want more speed from it. It should bring your topspeed a bit over 30mph
I don’t think it’s the ratio, that’s limiting me un loaded it’ll go 30. On tb 110 wheels I ran out of steam before I do on 85mm wheels