Just went through the thread all over again. Many people talking about five-star/rockstar wideners but no one posted a file.
Could someone please post one?
The next logical step in my crazy Lonestar adventure is going from my 9" to 10" but I need to widen in order to remove the bulge
I almost 99.9% positive Pedro has em. But I didn’t want to bug him over the weekend. I already annoy him enough during the week 
I miss that Brazilian stud
I would love to see an MBS version
@mishrasubhransu how has your MBS spacers been??
Well he’s still around, most likely just very busy. I chat with him regularly through our company messaging app
It fit the hubs perfectly, but I no longer working on esk8. Here are the files if you want to give them a try.
rockstar2_16mm_spacer.SLDPRT (532.0 KB)
spacer-ID10-OD16-L22.SLDPRT (87.4 KB)
spacer-ID10-OD16-L38.SLDPRT (78.1 KB)
spacer-ID12-OD18-L38.SLDPRT (77.2 KB)
@poastoast or @PedroMcJimenez 
can one of you make these and I’ll pay you I want to try a set
still no file? I wanted to print some more too
edit: here they are
EspaçadorSuperstars^SuperStars_Montagem_THIIICK.STL (213.2 KB)
SEARCH TERMS: trampa, superstar, spacer, file, STL, widening, 3d printed
That’s Trampa. I was inquiring about MBS 
Mishra posted higher up from you 
DOH lmao my b
i gotchu!
Could someone with SolidWorks take the files and convert them to something more fusion360 friendly 
(ie.: .step)
oh shit you right
they’re not step 
I just opened the file in shapr, I’ll set em up as both stl and step 
mbs_hub_wide_thing.step (455.5 KB)
22L_16mmOD spacer.step (12.3 KB)
38L_16mmOD spacer.step (12.3 KB)
38L_18mmOD spacer.step (12.3 KB)
mbs_hub_wide_thing.stl (10.0 MB)
22L_16mmOD spacer.stl (98.5 KB)
38L_16mmOD spacer.stl (98.5 KB)
38L_18mmOD spacer.stl (98.5 KB)
no clue how filled I have to print it to retain strength, especially since I only got PLA, but I’l do some… testing
I think the first things that would give is the male pins on the spacer since that’slayer separation is bound to happen,
gotta print a bunch to see!
It shouldn’t matter too much imo with the fact it sandwiched in between the 2 halfs with screws
Oh btw, for anyone needing to know this.
MBS rockstar 2 and MBS five-star
Both have the same internals
Therefore these spacers (in post 388) have a good chance of working for either
(Black rockstar / White five-star)
All done!
Trampa Superstar Widener.step (219.8 KB)
File after adding another 5mm of width
extra thick.stl (316.9 KB)
Thank you @Pedrodemio!!
looks slike someone figured it out #127 Electric skateboard / It's a hybrid - feat. Ownboard ZEUS - YouTube
