Show me your top mount Enclosure [Wiki]

Venom121212 · November 27, 2019, 2:57am

10s5p Samsung 30q cells
Made by @hyperIon1

Saturn_Corp · November 27, 2019, 4:29am

12s4p 30q and hot swappable 2x 6s 10Ah lipos in series.

PetrHomolka · November 27, 2019, 4:52am

12S6P 30q

anorak234 · November 27, 2019, 5:04am

!

rafaelinmissouri · November 27, 2019, 5:25am

Pelican 1150.

10s4p 40t.

taz · November 27, 2019, 8:16am

12S7P Samsung 30Q made by yours truly
2x Trampa Vesc6
2x HK SK8 149kV
e-toxx mini gear drive 5:1
concave pads mod
MBS F5 bindings

Build log (sort of) Trampa 12s7p, VESC6, 6374 sk8, e-toxx mini gear drive

Kalitapaws · November 27, 2019, 8:52am

Forgot to add this:

Battery: 12s8p Samsung 30q
Made by: me
Case:

Martin · November 27, 2019, 10:20am

10S1P 20AH lithium polymer battery.

I’m using fomex.

malJohann · November 27, 2019, 12:42pm

This was my setup until 2 months ago.

ducktaperules · November 27, 2019, 1:22pm

Work In Progress - Custom enclosure for 12S8p 18650

mmaner · November 27, 2019, 1:57pm

WIP - up to 13s5p 18650 with space for dual ESC’s with or without charge port, voltmeter & switch.

ixf · November 27, 2019, 2:20pm

Battery: 4500 mah 6s x 4 in 12s 9000 mah format (99whr battery when seperated, air travel safe)

Battery bag: https://www.amazon.com/gp/product/B0725P7BR7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Its cushoned, splash proof, in the winter it keeps battery warm, in the summer you can unzip to get venting.

Gerrycorrado · November 27, 2019, 2:22pm

Pelicase 1150, 12s7p 30q from @pjotr47
Unity in 3dservivas case

ixf · November 27, 2019, 2:23pm

Battery: 4500 mah 6s x 4 in 12s 9000 mah format (99whr battery when seperated, air travel safe)
I use a single set of battery for multiple boards. keeps my wallet happy

Bag: https://www.amazon.com/gp/product/B0721Q7PGM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Dual compartment. Vescs and electronics on the bottom, battery on top. padded, splash proof, insulated for cold zippers for vent

robedude · November 27, 2019, 3:31pm

Two Turnigy 12Ah 6S Lipos in series.

Arzamenable · November 27, 2019, 4:23pm

Case:
AmazonBasics Hard Camera Case -… https://www.amazon.com/dp/B01L0LVDJO?ref=ppx_pop_mob_ap_share
Fits up to dual 22ah hrb 6s (I.e. trampa monster box equivalent)

Update: fits 14ah 6s tattu lipos x4

Andy87 · November 27, 2019, 4:33pm

@Riako
@glyphiks
@seaborder

rich · November 27, 2019, 10:03pm

Ok here we go

Pelicase 1150 bolted to the deck with rubber rings between bolts and deck.

M4 countersink bolts and 2mm thick square nuts with Loctite, never came loose.

What’s inside right now, a self-made 12s6p of VTC6

Then a sturdy divider to seperate the battery from the BMS inside the enclosure. I bent 0.8mm aluminium sheet to desired shape.

Cushioning everywhere, mostly a combination of hard and soft foams.

For the vescs I bent 2mm ABS sheet with the heat gun.

Santino · November 28, 2019, 4:40am

4 x HRB Lipo 6000mAh (12s2p)
Hook & loop heavy duty
Hook & loop straps

3D printed protectors for BMS connectors
BMS connectors with hook & loop attached to the battery for safety
Loop Key with anti spark XT-90

Xclr8r · December 1, 2019, 1:05am

2 x 6S 14,000 mAh Tattu LiPo batteries in an off brand Pelican like hard case. Bought this case because it had a slightly larger internal length than Pelican case and thus the Tattu batteries would fit in it. Mounted using heavy duty Velcro.