Case:
AmazonBasics Hard Camera Case -… https://www.amazon.com/dp/B01L0LVDJO?ref=ppx_pop_mob_ap_share
Fits up to dual 22ah hrb 6s (I.e. trampa monster box equivalent)
Update: fits 14ah 6s tattu lipos x4
Case:
AmazonBasics Hard Camera Case -… https://www.amazon.com/dp/B01L0LVDJO?ref=ppx_pop_mob_ap_share
Fits up to dual 22ah hrb 6s (I.e. trampa monster box equivalent)
Update: fits 14ah 6s tattu lipos x4
Ok here we go
Pelicase 1150 bolted to the deck with rubber rings between bolts and deck.
M4 countersink bolts and 2mm thick square nuts with Loctite, never came loose.
What’s inside right now, a self-made 12s6p of VTC6
Then a sturdy divider to seperate the battery from the BMS inside the enclosure. I bent 0.8mm aluminium sheet to desired shape.
Cushioning everywhere, mostly a combination of hard and soft foams.
For the vescs I bent 2mm ABS sheet with the heat gun.
4 x HRB Lipo 6000mAh (12s2p)
Hook & loop heavy duty
Hook & loop straps
3D printed protectors for BMS connectors
BMS connectors with hook & loop attached to the battery for safety
Loop Key with anti spark XT-90
2 x 6S 14,000 mAh Tattu LiPo batteries in an off brand Pelican like hard case. Bought this case because it had a slightly larger internal length than Pelican case and thus the Tattu batteries would fit in it. Mounted using heavy duty Velcro.
After waterproof style case, junction/electrical boxes time !
Center :
Watterproof box 240 x 190 x 90 mm, IP55, customized
Rear :
MadBox for 2 x Fox + Metr. + Rx
https://www.altronics.com.au/hardware/enclosures-boxes/
Awesome range of electrical boxes here…
Yours look great!
I painted it black, add 3d print insert for all the holes around (also adapt 2 of them as passage for the wires and switch key), and then cover it with carbon/blue fiber. It can fit mainy type of battery pack, here it was 3 x 4s 10Ah 15c.
Edit: only see now its a no words thread …
Sweet ! Fit nicely !! I also like the tiny Fox 3dsas box on the rear
The setup look strong. Custom rear-handle-motor-bumper ? Awesome
Can you tell me more about those ? What copper type did you use ? Please make a build log
What’s the advice on fastening the enclosure to the deck? How do you keep the box stable and secure while the deck flexes and prevent any stresses being applied to it?
I cleaned up the battery wiring BTW.
Trampa 9" wheels, 5.9:1 gear drive
Top mount 20a/240w buck converter and rocker switch for LED under lighting 200ma/per light,800ma total draw. 5v3a waterproof usb connector and DC/DC tapped into main battery for USB recharging on the fly. Still waiting for the 3000lm 6" headlight to arrive
Using ratchet straps to hold the case on, and threw 1/4 inch neoprene on the bottom of the case for additional grip
10s2p 18650 battery
Pelican clone case for vesc
Uploading: C0C2673A-DB44-4A94-89FD-DE83C01221BD.jpeg…12s9p - lg hg6 20650s
Made by @BenjaminF of @DRI
Enclosure used:
https://www.amazon.com/dp/B081LZYNHN?ref=ppx_pop_mob_ap_share
Latest iteration of top box and I think the final. Can’t get much smaller. It’s a nice size compared to a year ago lol.
12s7p polycase
Nice case! What is it?