Looking forward to it! 
1 Like
Definitely gives off the iron man vibe, great job
1 Like
Here is the Easter egg! First I show the menus of the remote. I turned the 4 button remote into 7 buttons by making button D be a toggle between menu 1 and 2. Short press D is to query current menu, long press is to change menu and queries menu after changing. I show that button A is turn signal left on first menu whereas button A on 2nd menu is for Easter egg. Sound on. You’ll want to hear the ending 
13 Likes
I went for another ride last night. Just short of 15km. Its too cold! My hands and feet were freezing but the rest of me was warm. I cant wear any thicker gloves because then I can’t grip the remote well. I think this is it for me riding till Spring when the weather warms up. Also I suck at turning heelside. I feel like im going to fall off. I feel like my board is tilted slightly the opposite way to maybe that makes it harder to turn? When I’m off the board it starts turning toe side on its own instead of going straight. My toe side turns feel good. Does that mean my shock blocks are uneven? Does your board go straight when youre not on it?
Another thing is I need to change the vesc tool settings like Amp draw etc and the remote throttle curve. This board just jolts me forward if I move the wheel a little too much and the max speed is way beyond what I would ever do. I need to tame it down.
Good news is everything I made works, no issues.
5 Likes
I revamped my first post. I hope the links to everything come in handy to someone one day 
Mark I - Iron Man Esk8
5 Likes
Cheeky little bump to get yourself remembered for build of the year 
Hey it worked. I’ll nominate. This this has been a journey and a half and a lot of DIY has gone into it on the electronics and 3d printing side of things so you’ve certainly impressed me there 
1 Like
Hehe thank you
2 Likes
Might have some new functionality to add soon to Jarvis 
vote for my build for most DIY BOTY
If you’re coming here from the voting thread, and haven’t checked out my build before, click below and watch the videos of Jarvis in action!
6 Likes
The ending of Endgame must’ve hit you real hard man 
3 Likes
I’ll miss him 3000 
4 Likes
Same 
where real men cried.
2 Likes
I switched laptops after I made my software for my Arduino when I finished building this at the end of December. I thought I backed up my most recent version. I didn’t. I only have files from early December. I have to remake about 50% of the software that’s already on the Arduino to add in the new beacon and tracks for my security system. What would have taken an hour will take days. I don’t know where to begin with some of it. I have to remake all the interfacing I did with my touch screen from scratch. Luckily it seems I have the latest version of the software for my touchscreen.
2 Likes
How did I miss this. This is incredible.
1 Like
Thanks 
it’s taken a lot to learn and build this 
Update: remade the software. Everything works except reading values from my ESC, turns out my davega isn’t working either… my usplit seems to be broken 
haven’t used it since last year, I haven’t done anything with it so idk what happened. Contacted Matt about it… other than that I’m pretty much ready to ride again
1 Like
It’s back! What’s new: The phone charger and security system are set up! Added a loopkey.
Should probably take the wrapping off the rear lights 
S/O to @Ricco for helping my figure out how I broke the usplit again and fixing it. (No faults to usplit, it’s me). I highly recommend the usplit to everyone!
4 Likes
Let’s see it in action!
1 Like
It’s raining today tomorrow!
1 Like
That’s one crazy build, you definitely put in some work!
1 Like
So sick, anymore upgrades in the future?
1 Like