Luukjes pneumie rim design, interest poll in first post.

[tipsy]

So these hubs only fit berg tires?

[Nacho]

Clevers Bergs and all 6x2

The one on the right is AliBaba semi All-terrain 6 x 2 clever

[Linesflag]

but If they fit 6x2s they should also fit evolve’s

[Nacho]

In my head I don’t think they’ll fit maybe @brown5tick can give us a idea he’s the smart dude
but I might just buy them to try I really want white walls

[Linesflag]

I’m like 99% sure.

[brown5tick]

Good job you acknowledged that 1% chance that you could be wrong, because you’re wrong. They won’t fit.

6x2’s don’t fit Evolve hubs and Evolve tyres won’t fit these hubs.

[Linesflag]

Good thing I didn’t say 100% then. Have you tried it yourself? Because your link is the other way around, talking about 6x2s on evolve hubs. I run evolve tires on Trampas, that’s why I said that I’m pretty sure.

[brown5tick]

I don’t follow your logic there, sorry. What have Trampa hubs got to do with it?

No, I haven’t tried it myself tbh but since the required internal diameter of each hub differs, there doesn’t seem to be much point.

[BillGordon]

I have Trampa Superstars and Bergs. They don’t share tires.

[b264]

2.8" (6x2) and 3.75" are two totally different sized rims.

Obligated to drop this link here

Pneumatic Wheel Compendium (Serious)

The Goal I’m sure you’ve looked at a wheel and thought : . . . What pulleys fit this wheel. . . . What bearings does it take. . . . What is the bolt hole spacing. . . . is it compatible with . . . . Most 3.75" Hubs can fit 7" 8" as well as Trampa 6.5" tyres, TB 6" Tyres Evolve 6" TorqueBoards 6" Metroboards 6" 2.8" Hubs fit 6x2" tyres exclusively (Bergmeisters and Sixshooters) After my frustration trying to find some AT wheel related information, I decided there should be…

[rosco]

Is this setup on BNM1 gd? If so, have you had any chance to test it? Any issues / impression?

[brown5tick]

I’m a big, big fan of these little beauties. I mean, even ignoring the fact that they look so goddamn sweet, the width-to-diameter ratio plus the dome-sectioned tyres are the perfect combo for a little carver like this. Smooth, nimble and grip forever.

Did I mention that they look goddamn sweet? It’s not just skin-deep either. The manufacturing quality is first class. They spin true with no wobble whatsoever and the tolerances on the bearing seats for example are absolutely mint.

Will he ever make any more though, I wonder?

[xsynatic]

Dude the video looks so trippy

[Nacho]

I’m almost finished

Give me another year and she’ll be riding great

[LongDistance]

Anyone know if or what kegel drive with the 10mm bearing in it would fit evolve trucks?

[brown5tick]

Tap up @Savage1 for some of his beautifully crafted kegel pulleys.

Precision Kegal pulleys

[image] [image] [image] [image] [image] [image] [image] Hey all, I’m currently making a batch of precision machined Pulleys out of solid 6061 aluminum bar stock (so, one solid piece) to fit standard kegal cores, for a press fit application. There are 5 machined pins, 22mm length with a 1.6mm radius at the bottom. The pin diameter is 5.5mm held to a tolerance of +- .015mm. There is also a 22mm bearing seat bored to a depth of 7mm to accept either 608 bearings (8mm shaft) and 6900 bearin…

[Linny]

Bump! What sized tubes do you guys use for Bergmeisters? I’m setting mine up and my tube that comes with the bergs does hit the dome a bit.

[Bavioze]

If it hits from the side it should not be an issue afaik.

[Linny]

Scratches

[Bavioze]

You could put some shrinkwrap/tube around it