First Banggood Build

DIY Builds
1

Hello forum members,

I live in Turkey. This is the first time I’m gonna collect electric skateboards. I can only use Banggood, please don’t accept ads.Two feet and I weigh 110 pounds. I’m doing a skateboard on public transport to carry with me.

Is there something missing or wrong?

Part List:

HGLRC-Flipsky 6354 190KV 2450W Brushless Sensored Motor Shaft 8mm for Electric

[HGLRC-Flipsky Dual FSESC4.20 ESC Pro Switch Plus based on VESC with Anodized

[Flipsky 2.4G Screen Remote Control VX2 for VESC 4

[Maxfind 4 Pcs Skateboard Wheels 80A B: 7051

[Maxfind AHB03 Electric Skateboard Battery Box

[1 Pair 180mm 7’’ 43 Degree Longboard Trucks

[Electric Skateboard Accessories Belt Motor Bracket Pulley For 72MM Wheel

Maxfind Huger Skateboard Wood Board 7 730 x 198 x 11mm

1 Like
2

Why only banggood?

  • I’d use some better wheels, big difference in ride quality.
  • I’d swap the trucks and mounts.

I can’t tell from the description but looks like you’re missing

  • Battery
  • Pulleys
  • Belts
3

Edit: Sorry. Misread your motors as 6374.

1 Like
4

The last item listed includes belt and pulleys.

But the wheels for sure and trucks depending on config.

1 Like
5

Do you have links to these parts?

For a commuter board, I have a lot of suggestions. First, don’t use a longboard. use a short board with a tail, and make it a single large motor (6374 or bigger, 6380 is better)

Did you look at this?

2 Likes
6

beceuse

1-I will get the parts free of charge. It’s easier for me to put pieces into my country.
2-can you please send me the link from banggood
3- https://www.banggood.com/2Pcs-8-Inch-Aluminum-Truck-Skateboard-Bridge-Bracket-Hanger-Trucks-Skateboard-Longboard-p-1369727.html?rmmds=search&cur_warehouse=CN
this trucks are okey

perhaps because of translation

  • 2 piece ZOP Power 14.8V 5000mAh 4S 60C Lipo Battery XT60 Plug

pulley and belt
include

Screenshot_5
Screenshot_5.png1069×464 139 KB

7

i will buy two motor. I won’t pay for parts. i will chage trucks this model

2Pcs 8 Inch Aluminum Truck Skateboard Bridge Bracket Hanger

ZOP Power 14.8V 5000mAh 4S 60C Lipo Battery XT60 Plug 2 piece this battery

8

Without links, it’s hard for us to know what pieces you are talking about.

9

This motor mount is crap

b213324949f9b214d27c9fe4a33c584fc4637ed6_2_690x299

I would not use that, or any mount with a round hole for the truck hanger.

The truck hanger :arrow_forward: motor mount interface needs to be not-round.

8 Likes
10

I used that mount on my very first build. Ended up tearing up the hanger so I had to throw it out

1 Like
11

T-Motor P60 170KV 6-14S Agricultural UAV Power Brushless Motor IP55 Max Pull 8.5KG for RC Multi-Rotor

this motor can carry me?

12

Without links, it’s hard for us to know what pieces you are talking about.

Could you let us know what motor you mean?

13

Can you offer me a piece of banggood?

14

Not useable for esk8. Your original motors are good. I made a mistake when reading your post, so the length of your trucks might work, but as b264 says, both the mount and truck hanger profile are problematic.

15

this one motor can carry me?

3 Likes
16

Yes. At 110 lbs, definitely doable.

17

Screenshot_5
Screenshot_5.png1069×464 139 KB

18

Honestly, quite bad quality.

2 Likes
19

ok all links are here

https://justpaste.it/5t2rf

i can use only banggood because i won’t pay

1 Like
20

what do you suggest