good point! actually this is just a working prototype. I could add a C port in the next version.
19 Likes
With shipping to the USA we could expect to pay?
4 Likes
Nice little ESC!
Does that mean just 20A continuous battery amps ?
This design is wonderfully thin without the heatsink.
Suggestion: use a smaller copper heatsink with bigger mass but much thinner profile.
If you can get it down to 10-13mm, one could stack two of these and they would be similar height to the batteries -> ideal for a cramming a 4WD in a board with integrated enclosure.
7 Likes
For battery current, when I did the test, it was around 40v 20-25a. Really not sure its potential, because I did not find a larger motor to test it.
For the heatsink, you could just customize by yourself. There’ s no component on the other side of the pcb. you could even attach a water block on it.
8 Likes
I like that. In that case, I would recommend removing the connector on the other side making sure it’s flat. Like that it can be directly glued onto a heatsink (such as on some enclosures)
5 Likes
What is your expected price? I would love to test a couple of these on 13s
4 Likes
i really need a single motor esc, my fesc6 really isn’t working out.
PM’d
2 Likes
Photos are nice!
These are 1.25mm pitch? Nonstandard, So hard to crimp, and takes only very thin easy to break wire?
3 Likes
Awesome. Love seeing new options hit the market. Welcome aboard and I’m curious to see what this has to offer
2 Likes
Awesome formfactor, good job!
Design looks thought through. How is it managin without any electrolytics tho, how much cap could you fit in just the ceramics?
Good that you did a contineuos 1kw test. But…you did test 13S that you claim? Or are you just refering to maxvalues and thinking its cool?
Did someone make an official esk8.news torquebench yet where we send samples to get them tested?.. Feels overdue 
5 Likes
Nice compact design, I see there is some space left for CAN header. Maybe you can consider adding it 
14 Likes
LOL. I just wanted to make exactly the same comment. 
12 Likes
Pardon the silly question, but why is the heatsink on the opposite side from the FETs?
6 Likes
I thought you were doing this.
1 Like
Looks super awesome! Great size and form factor with the benefits of the vesc6, will be interested to hear proposed pricing and what other kind of testing is planned.
1 Like
I just need a spare garage, send me one and I’m all over this
3 Likes
What the price?
1 Like
I’d test a couple
UART and I2C over CAN?
dude get your priorities ordered!!
Nice board dimensions tho.
3 Likes