Sold 75 - ??
| # | item | cond | price |
|---|---|---|---|
| 75 | Idea Deck Brackets 30° | used (like new) | |
| 76 | Idea Deck Brackets, Black Horizontal, 20 mm deep | used (like new) | |
| 77 | Idea Deck | used (like new) | |
| 78 | Mad Wheels (v1) | new | |
| 79 | X-Things, Anti-Sink Plates | used | $20 shipped (US) |
| 80 | Lacroix Hypertrucks, Lights, extra Bushings | used (see pics!) | |
| 82 | VX1 remote | used | |
| 83 | 10s LLT smart BMS with ble dongle | new | $11.88 shipped (US) |
| 84 | 12s LLT smart BMS with ble dongle | new/used | $11.88 shipped (US) |
| 85 | box o freakin motors lacroix/maytech lonestar lacroix/proto … | used/repair | $0 + shipping (24lbs, ~$40 - $80) |
| 86 | Hoyt St ROSA Trucks (there’s a catch) | new | |
| 87 | set of 4x 13233 - MBS Rockstar II Hub - Carbon Print | used/very |
show me the sold stuff
#75 Idea Deck Brackets 30°
for idea deck system
#76 Idea Deck Brackets, Black Horizontal, 20 mm deep
for Idea Deck system
#77 Idea Deck
for Idea Deck system
not really used but may have been assembled and stood upon a few times.
It appears to be a “flex 2” deck. (measures ~10.3mm center thickness. )
Note, there’s very slight blemishing in the finish, whiter spots along the weave. not sure why.
See “more” pics for details.
#78 Mad Wheels (v1)
includes bearings for 10mm axels.
#79 X-Things, Anti-Sink Plates
#80 Lacroix Hypertrucks, Lights, extra Bushings
condition
used. They are scraped up a bit from braving a mountain trail, which turned out to be all rocks at points.
base plates
the base plates are the lonestar height ones. not the naz.
they were the anodized blue ones, painted black by prev owner which was a nice aesthetic.
bushings
They have green/red bushings in them.
there’s a brand new set of green and grey.
and a used, moded (corner rounded over) set of green and white
riptide in 2024 change the color scheme, these are old color scheme.
see attached image
unlesss you’re 90kg you don’t want the grey… and you probably want some white, yellow, blue in the mix.
Lights
The lights use the later upgraded aluminum mounts.
I just tested that they both work. IIRC I opened them once and repaired a broken wire.
they had some preventative hotglue “strain relief” that prev owner put on there… which is no longer doing it’s job… and could be removed.
motor mounts
The mounts are the stock lacroix mounts that have the smaller hole pattern.
people have used radium motors designed with both hole patterns, (the ones built that way, not all of them) or used adapter plates.
more pics… check em out.
↓↓↓↓↓↓↓↓↓
^^^^^^^^^^
#82 VX1 remote
I used to carry this around to intro2speed as backup when people forgot their remotes.
the throttle wires have been hardened.
#83 10s LLT smart BMS with ble dongle
includes balance connector and leads,
bluetooth dongle and two thermisitors
advance:
it could be converted to 12s (or I think up to 15s) by de bridging the appropriate solder bridges and updating s count in the app, then you have to make your own balance lead. they sent me 10s instead of 12s a while back and I converted one.
#84 12s LLT smart BMS with ble dongle
BMS is new, balance connector is not. see pics
includes thermisitor, bluetooth dongle. and balanced cables (used, cut… see more pics )
#85 box o freakin motors lacroix/maytech lonestar lacroix/proto …
this offering for $0 + shipping is for anyone who wants to play around with either nosiy motors or fixing up motors.
5 motors from O.G. lacroix lonestar/nazare (maytech 6396?? )
4 motors from O.G. prototipo. (6374 3500w? )
all 190kv
all of them seemed to pass a cursory join the phases and turn to feel resistance.
all but 2 should spin up and work. will likely be noisy either because of bearings or motor shafts.
1 proto motor says “bad inductance”
1 lonestar otor says broken magnet.
#86 Hoyt St ROSA Trucks (there’s a catch)
Try as he might @DEEIF can’t find the motor mounts that go with these trucks…
however mboards sells the mounts
outside of that they are very nice and pretty.
#87 set of 4x 13233 - MBS Rockstar II Hub - Carbon Print
These are fully functional, but well used, the carbon print is not in the best shape. have a close look at the more pictures.
