[WTS] [US] Redember NorthCamp + enclosure, z.Mote, Kaly Enclosure, Belts, - Fess Sells

[fessyfoo]

The List w/ Pricing

#	item	cond	price
88	more to come …
81	z.mote thumb wheel remote	used	$90 $72 $65 $59 $53 $48 shipped (US)
72	Kaly DS 18650/21700 Enclosure	new	$228 $149 $134 $120 $108 $97 $87 $78 $70 shipped (US)
25	Redember Northcamp and @BigBen Enclosure	new	$600 $598 $596 Delist $536 $482 $433 shipped (US)
15	HTD-15-5 Belts!!	new	$3.50ea $3.00ea $2.00ea shipped $1ea $0 + $4 shipping (US)

I take venmo, paypal, can work out other stuff if needed.
pls add fees if opting for buyer protection

Please use Messages and not (DMs/chat)
When you Message me, please be so kind as to change the subject to the item you’re requesting. ty

*note shipped price is continental US.

Pics

open/close pictures

#81 z.mote thumb wheel remote

z.Mote thumb wheel remote. and receiver.

I liked it for a thumb remote. I just stopped using it because it was easier to share hoyt remotes between my boards.

take note in pics

• it’s setup for pwm connection. the uart wires are there but would need extensions
• few cosmetic scuffs.

more pics

#72 Kaly DS 18650/21700 Enclosure

This is an eboards peru Kaly DS Enclosure.
see details on their website

This enclosure has been designed fit the Kaly XL deck

it’s new/unused but has a few scuffs from hanging around. see detailed pics

Note there are newer and older (in house) generations of Kaly Decks. This enclosure fits the newer generation

@hoytkid discusses how to identify them

more pics (and dims)

From Eboards Peru website:

#25 Redember Northcamp and @BigBen Enclosure (new)

sadly never got around to building this.
it was listed… then I delisted it… to build it hopefully. now it’s relisted

it’'s now gotten a few scuffs from being moved around. see pictures on blue towel which are the recent ones.

enclosure is about 9 x 9 in 21700 p42as doublestack.
66cm x 19cm x 5cm

The smallest battery you’d do is probably 14s8p and if you’re good at packing and move the ESCs to the outside 18s9p

see more pics section.

size:

• It’s 47" from tip to tip.
• the dropdeck area / standing platform
  • 29" not including the drops
  • 35" including the drops
• 11.5" wide.

More

newer pics

older pics

#15 HTD-15-5 Belts POWGE

I figure i see people randomly looking for a quick belt and i have a bunch “in stock” might as well list them in case it helps.

length	width	pitch	qty	E
365	15	5	2
365	15	5	2	Used, $0, add on to any other order
370	15	5	4
405	15	5	1	(prototipo)
445	15	5	6

More

[fessyfoo]

Sold 1 - 25

#	item	cond	price
1	DieBieMS batch 3,	new	$120, $99, $79 shipped (US)
2	@IDEA v7 motor mounts with idlers for MBS matrix II	new	paid $183, $99 shipped (US)
3	@IDEA 72T wheel pulleys with MBS hole pattern	new	paid 133 $69 shipped (US)
4	12s BMS pulled from mboard battery	used	$9 shipped $0 + shipping (US)
5	12s Lacroix Lonestar BMS (OG)	used	$17 $10 shipped $0 + shipping (US)
6	Pair of Boosted Motors for repair. wobbly shafts.	needs service	$10 shipped $0 + shipping (US)
7	2x Lacroix Stormcore 100D	used	$325ea shipped (US)
8	EnertionUSA Unity (no blood)	new	$300 shipped (US)
9	Nano remote and receiver	used	$0 + shipping (or $5) (US)
10	Enertion Nano remote and receiver	used	$0 + shipping (or $5) (US)
11	Land Surf HammerHead Remote (enertion nano guts)	used	$10 shipped $0 +shipping (US)
12	MBS Matrix II truck, + bonus hangar	used	$35 shipped (US)
13	Stooge SRB 3-link trucks w/ new axels and extra motor mounts	used	$295 shipped (US)
14	2.4ghz mini remote and receiver	new	$15 $12.50 shipped (US)
17	set of 2 MBS rockstar hubs	new	$22 $20 $16 $14 $12 shipped (US)
18	Land Surf Axle Nuts V1 M12 Black x4	new	$16 $12 $8 shipped (US)
19	Land Surf Deez Nuts V2 M12 Black x4	used	$18 $14 $10 shipped (US)
20	Land Surf Axle Nuts V1 M12 Red x4	used	$14 $10 $6 shipped (US)
21	Land Surf Axle Nuts V2 M12 Red x3	used	$9 $5 $0 + $3 shipping (US)
22	YZPower-450 12s 6A charger	new	$44 shipped (US)
23	Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft	new	$214 + ship $190 $170 $153 $138 $125 shipped (US)
24	Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft	new	$150 + ship $140 $126 $115 $104 $94 shipped (US)

show me the sold stuff

#1 DieBieBMS

#2 @IDEA v7 MBS motor mounts with idlers

more

#3 @IDEA 72T wheel pulleys

more

(other side)

#4 12s mboard bms

more

#5 12s BMS, lacroix lonestar

more

#6 pair of boosted motors, need service, wobbly shaft

more

note video of shafts, one is worse than the other. motors work.

#7 Lacroix Stormcore 100d (x2)

Update, these are apparently an early batch stormcore. (first batch?) No 100D marking on the sides. no version info on the pcb. be aware of this. first one was stress tested by the buyer. said it was good.

Note just the stormcore what you see in the pics. I don’t have the power buttons to go with em.

I got these from a PEV company that was trying them for use in their PEVs I think they went another direction. I was keeping them for an HV awd build, but… i have shown not to build things so they are available to someone who needs them more than me.

more

#8 EnertionUSA Unity

New, opened box. I got these from EnertionUSA for a yet another build i seem to never get to, I opened the box to ensure they worked. I did motor detection with them and that’s it. put it all away in the box after. not sure i want to sell them but they are available if someone needs them now more than me.

show

#9 Nano Remote and Receiver

#10 Enertion Nano Remote and Receiver

Note: this one is failing to charge. red light flashes fast. I suspect that means battery is bad. Pick it up with one of the other ones as spare guts… or replace the battery.

comes with receiver which I just tested today it works.

#11 Land Surf HammerHead remote and tranceiver.

Note the charge light on this one never worked after the mod. it charges but the red light doesn’t come on while charging.

This is a 3d printed case mod for the Nano remote guts. Designed by Land Surf.
this one has enertion nano remote guts.

i really liked this one. but without a trigger guard i bumped it too frequently.

#12 MBS Truck, extra hangar, risers.

MBS truck + 2nd truck free only missing toptruck/baseplate.
1 hangar srapped concrete, see pics.
replacement washers and nuts are not black. see pics.

more

#13 Stooge Race Boards (SRB) 3-link trucks

Standard 3-link trucks, (non HD)
the axels are brand new unused.
motor plates are 30mm spacing. ( i ran 44mm spaced motors diagonally )
include second set of motor plates and cross bar. these are the smaller ones that mainly work with the stooge gear drives.

more

#14 2.4ghz mini remote and receiver

bought this to play with the classic esk8 remote. didn’t get around to it. never used it.

#15 HTD-15-5 Belts POWGE

length	width	pitch	qty
365	15	5	3
405	15	5	4
440	15	5	4
435	15	5	1
445	15	5	6
470	15	5	5

#17 Set of 2 MBS rockstar II hubs new. (sans bolts)

These were never used.
Now with bolts.

Break on thru to the other side

#18 Land Surf Axle Nuts V1 M12 Black x4 (new)

More

#19 Land Surf Deez Nuts V2 M12 Black x4

More

#20 Land Surf Axle Nuts V1 M12 Red x4

More

#21 Land Surf Axle Nuts V2 M12 Red x3

NOTE I lost one of these. so there’s only 3

More

#22 YZPower-450 12s 6A charger

has a dc5.5 connector. but you can put whatever you need on it.

More

#23 Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft

more

#24 Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft

More

[fessyfoo]

Sold 26 - 50

#	item	cond	price
26	FreeSK8 OSRR Bruce and receiver	used	$310 $290 shipped (US)
27	Metr Pro Unity	used	$40 $35 $30 shipped (US)
28	Moon Drive mounts for MBS Matrix II	used	$20 $17 $15 $12 shipped (US)
29	SRB 30mm Standard motor plates	used	$30 $25 $22 $18 $16 $14 $10 shipped (US)
30	Pair of Lacroix 20T Titanium pulleys 10mm bore	used	$25 $20 $18 $16 $10 $0 + $5 shipping (US)
31	Pair of 15T Aluminum Pulleys 10mm bore	used	$15 $13.50 $10 $8 shipped $0 + $5 shipping (US)
32	Pair of SRB 78T Spur Gears	used	$65 shipped (US)
33	Freesk8 Xenigotchi / Robogotchi + GPS	used	$90 $45 $40 $34 shipped (US)
34	set of 4x MBS rockstar hubs + 2x 62T pulleys	used	$60 $54 shipped (US)
35	DaveGA (Xcell branded)	new	$135 $121 $108 $97 $87 shipped (US)
36	Freesk8 OSRR Albert and Receiver, Unobtainium.	used	$300 shipped
37	Enertion USA Focbox Unity (No Blood)	new	$300 $270 $243 $218 shipped (US)
38	2x 1x Daly 12s BMS	new	$15 $13.5 $12 shipped (US)
39	Dual Escape ESC	used	$300 $270 $243 $218 $196 $176 $158 $142 $127 $114 $101 shipped (US)
40	batwing puck remote (sans rx)	used	$80 $72 $65 $58 $52 $45 $40 $36 shipped (US)
41	MJF Poastmote puck remote (sans rx)	used	$80 $72 shipped
42	Mini Puck (nug puck?) remote (sans rx)	used	$69 $62 $56 $50 $45 $40 $36 $30 shipped (US)
43	nylon puck shell, Midnight (Lacroix)	used	$19 $17 $15 $10 $6 shipped(US) $0 + $4.25 shipping (US) or add on.
44	nylon puck shell, Midnight	used	$20 $18 $16 $10 $6 shipped(US) $0 + $4.25 shipping (US) or add on.
45	Hoyt puck Receiver (rx)	used	$20 $18 shipped
45	Subsonic GT40 w/ eBoosted Enclosure	used (newish)	415 $350 $333 $300 $270 $243 $218 shipped (Continental US)
46	nylon puck shell, ICE/Clear	very used	$15 $10 $8 $0 + $4 shipping (US)
47	Left foot MBS binding	new	$49 $45 $40 shipped (US)
48	FreeSK8 Xenigotchi (Robogotchi) and GPS	used	$90 $45 shipped (US)
49	Pair of moon drive 44T spur gears	new	$26 $23 shipped (US)
50	Oil Slick MBS Matrix II + Moon Drives + lacroix bushings	used	$330 $300 $270 $243 $218 $196 $176 $158 $140 $100 shipped (US)

show me the sold stuff

#26 FreeSK8 OSRR Bruce and receiver

For reasons related to my builds and my time to mess with things, I haven’t been using this unobtanium remote. So it should go to someone else who will.

Also it’s too big for my gloved hands. Smaller models were supposed to arrive someday.

More Pics

#27 Metr Pro Unity

This metr pro fits neatly in the unity/xenity. but with the right skills an adapter cable can plug it into any vesc.

More

#28 Moon Drive mounts for MBS Matrix II trucks

More Pics!

#29 SRB 30mm Standard motor plates

Not purty but fine with some cleanup and paint. no cross bar included.
for standard axle not HD.

definitely inspect the more pics

#30 Pair of Lacroix 20T Titanium pulleys

20T
10mm bore
w/ keyway

Note! these do not have holes for grub screws, lacroix held them in place with circlips.

sry they have not been cleaned up.

More Pics

#31 Pair of 15T Aluminum Pulleys

15T
10mm bore
w/ keyway

more pics

#32 Pair of SRB 78T Spur Gears

More PIcs

#33 Freesk8 Xenigotchi / Robogotchi + GPS

Sold out everywhere!

Xenigotchi automatic always on data logging, and bluetooth dongle.

Designed to fit neatly in the BKB Xenith or the Foxbox Unity, (or shudder the tenka)
with the right cable it could also be used with any vesc.

Includes the separately sold gps module and unused gps case.

#34 set of 4x MBS rockstar II hubs, + 2x 62T pulleys used

4x hubs, 2x 62T lacroix pulleys. (using 13mm spacers on 55mm bolts)

More

#35 DaveGA (Xcell branded)

Listing this on behalf of @DEEIF

I powered it on and it booted up and connected to a vesc. (see vid in details)
comes with a few extra bits and bobs, see photos.

more pics and video

#36 Freesk8 OSRR Albert and Receiver Unobtainium

Again, listing on behalf of @DEEIF

includes 1 receiver.

Note the remote originally had a tall thumb pad on the trigger. This fell off. Since I didn’t like the extra height I used it without this pad. The pad got lost. so it’s not included. look close at the photos to see what i mean.

more pics

not the actual item. shows the original thumb pad:

#37 Enertion USA Focbox Unity (No Blood)

New, opened box. I got this from EnertionUSA, so it’s not a blood unity. I opened the box to ensure it worked, and also to take pics. I did motor detection with them and that’s it. box has taken some wear (see pics)

This is my spare because two of my boards still run this. but on the chance someone else needs it, i figured i’d list it.

more pics

#38 2x Daly 12s BMS

more stuff i never got around to using.

more pics

#39 Dual Escape ESC on Heatsink

More ESCs i never got around to using. Not sure if I want to sell this one or use it for it’s historical awesomeness. but if someone’s gonna use it. that’s better than me sitting on it.

#40 batwing puck remote (sans rx)

more pics

#41 MJF Poastmote puck remote (sans rx)

more pics

#42 Mini Puck (nug puck?) remote (sans rx)

NOTE: the T-button was made functional by me by clearancing the button hole. and it was over done. see the video in “more photos” section.

I’m not sure if this is actually the nug puck, i can’t identify which case this is. it’s a 4 button variant of something that looks like the 3 button nug puck. It’s very small and nice in the bare hand.

more pics

NOTE, button clearance issue video

#43 nylon puck shell, Midnight (Lacroix)

This shell came of a lacroix puck so it says it on the back. (see more pics)

more pics

#44 nylon puck shell, Midnight

this thing was new. but looks like it got scratched up hanging around doing nothing. so… “used”

more pics

#45 Hoyt puck Receiver (rx)

more pic

#45 Subsonic GT40 w/ eBoosted Enclosure

Used, but newish. was never used, but has a small shipping blem on upper rail.
and both board and enclosure have some scuffs from shuffling around being stored.

Please see “more pictures”

Includes gasket and inserts, bolts.
Inserts were installed by subsonic.
gasket was cut by subsonic.

was $415 new.

more pics

#46 nylon puck shell, ICE/Clear

NOTE: See the “more pics” this has some kinda glue residue or something on it, maybe it’ll clean up, but idk, it seems like it’s part of things now. it would all hide under any kinda grip you add to the edges. there’s grip bits that probably will come off.

more pic

#47 Left foot MBS binding

#48 FreeSK8 Xenigotchi (Robogotchi) and GPS

Xenigotchi is plugs right into a unity or xenith ESC. or you can add your own cable to plug into another uart port of any other ESC.

more pics

#49 Pair of moon drive 44T spur gears

more pics

#50 Oil Slick MBS Matrix II + lacroix bushings + free moon drive bits.

solidly used.

Matrix II trucks include modified bushing plate and gubs screws to accomodate riptide bushings for lacroix hypertrucks.

not pictured:

• I will include new flange bushigns for the matrix IIs.
• 2 extra pairs of riptide/lacroix bushings white/green. (blue/yelllow currently installed)

!!!NOTE!!! I went to sell theses and i have lost the pinions for the moon drives. so. i’m dropping the price a bunch more.

Moon drives are Gen 1 MD case, with Gen 4 POM 44 T gears and 12T pinions (fairly sure. I’m not opening to validate used with 6" tires on 12s board 190kv motors. ) Includes spare 44T gen 3 gear.

These were running well for me for a long time, I took em off to test Tito’s trucks w/boadnamic gears. again note that they do not include the pinions as I seem to have lost them.

more pics

[fessyfoo]

Sold 51 - 74

#	item	cond	price
51	set of 11T 12T and 14T Mod 2 (Moon Drive) Pinions (8mm shaft)	mixed	$40 $36 $32 shipped (US)
52	Drive Train, 3ds mini gear drive 1:2.8, Fatboy hangers, Abec 11 107 superfly	used	$400 $360 $325 $290 $260 $234 $210 $189 $170 $150 shipped (US)
53	Z.Mote Trigger with Torch option	used (barely)	$125 $110 shipped (US)
54	@Savage1 prototype boardnamics clamps for SRB HD axle	new	$100 $70 shipped (US)
55	Boardnamic M1-AT clamps for SRB HD axles	new	$34.99 $27 shipped (US)
56	@surfnacho InfinitySink Universal ESC Heatsink	new	$60 $45 $40 $36 $32 $29 $26 $24 shipped (US)
57	MBS F5 binding. Left foot.	used	$45 $40 shipped (US)
58	motor bolt 40mm to 30mm adapter	used	$20 shipped (US)
59	Freesk8 OSRR Receiver (Unobtanium)	used	$50 shipped (US)
61	Apex Air Trucks. Unobtanium!	new	$299 shipped (US)
60	MBS bushings	used	free + $5 $4 shipping (US) or add on to something
62	Freesk8 GPS module 1.25	used	$20 shipped
63	Freesk8 Xenigochi + GPS 1.25 module	used	$90 $45 shipped
64	Pair of Little Focer ESCs hw v3.0	new	$699 $629 shipped (US)
65	Focbox Unity #2	used	$199 $180 $162 $146 $132 shipped (US)
65b	Foxcbox Unity #3	used	$199 $170 $150 $135 $122 shipped (US)
66	Stormcore 100D+ (Unobtanium)	used	$399 $359 $323 shipped (US)
67	Apex Jump Drives (Unobtanium!)	new	$499 $410 Shipped (US)
68	Pair of Torqueboards ESC + InfinitySink	used	$219 $197 $177 shipped (US)
69	XCELL™ APOLLO™ XT Wide wheels and tires. set of 4	used	$339 $305 $274 shipped
71	Spintend 75/100 dual ESC	new	$230 $207 $186 $167 $150 shipped (US)
73	Kaly Deck XL 2.0 pre 2021	used (good condition)	$299 shipped (US)
74	12s4p molicel Duck battery, Enclosure and BMS	used (barely)	$169 + shipping

show me the sold stuff

#51 set of 11T 12T and 14T Mod 2 (Moon Drive)

2 pair 12T used.
2 pair 11T barely used.
2 pair 14T new.

8mm shafts

more pics

#52 Drive Train, 3ds mini gear drive 1:2.8, Fatboy hangers, Abec 11 107 superfly

3dservisas Mini gear drive (just did a service with new grease) 1:2.8 ratio
2x230 hangers FatBoy cnc
2x caliber 2 baseplate with riptide bushings and pivots (rear 44 and front 50)
4x Abec11 107mm superfly wheels

NOTE*: i overheated one of the motors with a heat gun trying to get a case screw to unloctite and dislodged a magnet. lame

so listing is for 1 motor… and one… borked motor. which maybe if you’re into ti you could reepoxy and fix.

1x6374 motors 220kv

more pics

#53 Z.Mote Trigger with Torch option

Z.Mote with torch option

Unfortunately this thing just didn’t fit my hand properly. (small hands) Otherwise I really liked it.
Kaman offered to print me som mod’d triggers to try to work it out. But I just don’t have time to take him up on it.

So… rather than it sit around. it needs to go.

more pics

#54 @Savage1 prototype boardnamics clamps for SRB HD axle

These were produced in a small batch by @savage1 designed to help attach the boardnamic SRB clamp to the axle.
I never got around to trying that experiment as my boardnamic GD got sniped for a different purpose.

more pics

#55 Boardnamic M1-AT “clamps” for SRB HD axles

these are stock from boardnamics.
requires a jam nut to “clamp”. but see #54 above to add actual clamping.

more pics

#56 @surfnacho InfinitySink Universal ESC Heatsink

more pics

#57 MBS F5 binding. Left foot.

I knew i had another one of these somewhere. found it today searching for pinions.

more pics

#58 motor bolt 40mm to 30mm adapter

bolts to a motor with 40mm bolt pattern allowing it to fit in motor mounts with a 30mm bolt patten.

more pics

#59 Freesk8 OSRR Receiver (Unobtanium)

I knew i had one spare somewhere. Also found this digging through stuff looking for pinions. yay.

Does not include GPS or GPS cable.
Includes partial cable connector on receiver end only. see “more pics”

more pics

#61 Apex Air Trucks. Unobtanium!

more pics

#60 MBS bushings

just need shipping to get these to whomever might want 'em.
can add em on free to anything else too.

more pics

#62 Freesk8 GPS module 1.25

more pics

note this is v1.25 of the gps module.

gps module, cable, and top case only.

#63 Freesk8 Xenigochi + GPS 1.25 module

note this has version 1.25 of the gps module.
and v1.5 of the xenigotchi, tho it has a larger gps connector than other v1.5 i’ve seen.

xenigotchi, gps, cable, case and bolts included

more pics

#64 Pair of Little Focer ESCs hw v3.0

more pics

#65 Focbox Unity #2

xt90 power and 4mm bullets. power button included.

more pics

#65b Focbox unity #3

note

• has 3.5mm bullets instead of the usual 4mm.
• xt90
• does not include box or power button.

more pics

#66 Stormcore 100D+

more pics

#67 Apex Jump Drives Unobtanium

more pics

#68 Pair of Torqueboards ESC + InfinitySink

more pics

#69 XCELL™ APOLLO™ XT Wide wheels and tires. set of 4

Note

1. these currently have bearings in them for 10mm axles. If you have 10mm axles you’ll need your own bearings.
2. 10 of the 20 bolts are 50mm for attaching a wheel pulley. depending on what you use you may need different lengths.

more pics

#70 SRB 78T spur gears and Bearings

note these are the older one piece style.

Bearings are for 10mm axles

more pics

#71 Spintend 75/100 dual 18s ESC

Please note this is likely an early version of Spintends “18s” variants. and it might be better to just consider it a 16S max ESC.

more pics

#73 Kaly Deck XL2.0 pre 2021

after a bit of a convo, @hoytkid identified this deck as a kaly XL2.0 pre 2021 in house version. (the O.G. decks) it’s slightly shorter than the later generations

NOTE: The eboards peru kaly DS enclosure i have listed does not fit this board. It was designed for the later generation so it is actually a bit longer.

for an enclosure that fits, @hoytkid says:

if you want an enclosure for the [og] deck you have closest one that works is eboards peru trampa enclosure

more pics and info

side view of the composite

(ignore the grip tape pulling up there. )

Note

the eboards peru enclosure seems to be a bit bigger than this deck actually is:

it does seem to line up with the dimensions of this kaly 2.0 deck

#74 12s4p molicel Duck battery, Enclosure and BMS

This thing was made 2021-02-26 by Duck Batttery Systems. AFAIK it was never used. So it has sat the entire time. all 12 cells are at ~ 3.49v

I don’t yet know how to ship a battery. so i’m hoping to sell local in L.A. CA, but I can probably figure it out if needed.

The enclosure is 27.5" by 8" wide.

Note in more pics, some scuffs on the underside of the enclosure from being moved around.

more pics

[OleksiiF]

Ill take enertion remote and reciever

[fessyfoo]

Sold 75 - ??

#	item	cond	price
75	Idea Deck Brackets 30°	used (like new)	$150 $135 $121 $119 $107 $96 $86 $77 $69 shipped (US)
76	Idea Deck Brackets, Black Horizontal, 20 mm deep	used (like new)	$160 $144 $130 $117 $105 $95 $85 $77 $69 $110 (bundled with #77 deck) shipped (US)
77	Idea Deck	used (like new)	$160 $144 $130 $117 $105 $95 $85 $77 $69 $110 (bundled with #76 brackets) shipped (US)
78	Mad Wheels (v1)	new	$95 $85 $76 $67 $60 $54 shipped (US)
79	X-Things, Anti-Sink Plates	used	$20 shipped (US)
80	Lacroix Hypertrucks, Lights, extra Bushings	used (see pics!)	$360 shipped (US) $325 shipped (KR)
82	VX1 remote	used	$9.98 $8.88 shipped (US)
83	10s LLT smart BMS with ble dongle	new	$11.88 shipped (US)
84	12s LLT smart BMS with ble dongle	new/used	$11.88 shipped (US)
85	box o freakin motors lacroix/maytech lonestar lacroix/proto …	used/repair	$0 + shipping (24lbs, ~$40 - $80)
86	Hoyt St ROSA Trucks (there’s a catch)	new	$499 $249 shipped (US)
87	set of 4x 13233 - MBS Rockstar II Hub - Carbon Print	used/very	$79.8 $32 shipped US

show me the sold stuff

#75 Idea Deck Brackets 30°

for idea deck system

see idea post here

more pics

#76 Idea Deck Brackets, Black Horizontal, 20 mm deep

for Idea Deck system

more pics

#77 Idea Deck

for Idea Deck system

not really used but may have been assembled and stood upon a few times.

It appears to be a “flex 2” deck. (measures ~10.3mm center thickness. )

@IDEA

If a single-chamber battery enclosure, such as one from eBoosted, is going to be installed, the deck’s stiffness doesn’t matter much because mounting such an enclosure significantly stiffens the deck.

Note, there’s very slight blemishing in the finish, whiter spots along the weave. not sure why.

See “more” pics for details.

more pics

#78 Mad Wheels (v1)

includes bearings for 10mm axels.

more pics

#79 X-Things, Anti-Sink Plates

more pics

#80 Lacroix Hypertrucks, Lights, extra Bushings

condition

used. They are scraped up a bit from braving a mountain trail, which turned out to be all rocks at points.

base plates

the base plates are the lonestar height ones. not the naz.
they were the anodized blue ones, painted black by prev owner which was a nice aesthetic.

bushings

They have green/red bushings in them.
there’s a brand new set of green and grey.
and a used, moded (corner rounded over) set of green and white

riptide in 2024 change the color scheme, these are old color scheme.
see attached image

unlesss you’re 90kg you don’t want the grey… and you probably want some white, yellow, blue in the mix.

Lights

The lights use the later upgraded aluminum mounts.
I just tested that they both work. IIRC I opened them once and repaired a broken wire.

they had some preventative hotglue “strain relief” that prev owner put on there… which is no longer doing it’s job… and could be removed.

motor mounts

The mounts are the stock lacroix mounts that have the smaller hole pattern.
people have used radium motors designed with both hole patterns, (the ones built that way, not all of them) or used adapter plates.

more pics… check em out.

↓↓↓↓↓↓↓↓↓

more pics

^^^^^^^^^^

#82 VX1 remote

I used to carry this around to intro2speed as backup when people forgot their remotes.

the throttle wires have been hardened.

more pics

#83 10s LLT smart BMS with ble dongle

includes balance connector and leads,
bluetooth dongle and two thermisitors

advance:
it could be converted to 12s (or I think up to 15s) by de bridging the appropriate solder bridges and updating s count in the app, then you have to make your own balance lead. they sent me 10s instead of 12s a while back and I converted one.

more pics

#84 12s LLT smart BMS with ble dongle

BMS is new, balance connector is not. see pics

includes thermisitor, bluetooth dongle. and balanced cables (used, cut… see more pics )

more pics

#85 box o freakin motors lacroix/maytech lonestar lacroix/proto …

this offering for $0 + shipping is for anyone who wants to play around with either nosiy motors or fixing up motors.

5 motors from O.G. lacroix lonestar/nazare (maytech 6396?? )
4 motors from O.G. prototipo. (6374 3500w? )

all 190kv
all of them seemed to pass a cursory join the phases and turn to feel resistance.
all but 2 should spin up and work. will likely be noisy either because of bearings or motor shafts.

1 proto motor says “bad inductance”
1 lonestar otor says broken magnet.

#86 Hoyt St ROSA Trucks (there’s a catch)

Try as he might @DEEIF can’t find the motor mounts that go with these trucks…

however mboards sells the mounts

@Mikenopolis

MBoard has their inventory. $20 per mount…$35 if you buy both.

Hoyt St. Rosa Motor Mounts — MBoards

outside of that they are very nice and pretty.

more pics

#87 set of 4x 13233 - MBS Rockstar II Hub - Carbon Print

These are fully functional, but well used, the carbon print is not in the best shape. have a close look at the more pictures.

more pics

[fessyfoo]

enertion nano, and regular nano remotes sold.

[fessyfoo]

idea pulleys sold.
drop price to 0 on hammerhead.

[fessyfoo]

boosted motors gone.

[fessyfoo]

damn. so much for adding stuff every week.

at least i sold something without even posting. box of 200 molicell p42a $800

[jesus]

dm sent

[fessyfoo]

Added 1.5 MBS trucks

[nclayton]

Dm’d about trucks.

[fessyfoo]

MBS trucks sold. someone sniped in even before @nclayton

[fessyfoo]

Added 3-link trucks.

[dskate]

Messaging you fess

[fessyfoo]

3-links sold.

[fessyfoo]

giving away the hammerhead. updated price.

[Akbrock47]

Pm inbound

[fessyfoo]

Hammerhead sold.

mboard bms sold.

lacroix bms sold.