[WTS-US] Deck Wings / Motor Pulleyz / MTB Bearings

Motor Pulleys

Aluminum 12T w/ extra short grubs and no keyway, steel 14T, 16T, 18T, and 20T w/ keyway. All 16mm wide for 15mm belts, and bored for 10mm motor shafts.

$12/$20/$35 shipped for 1x/2x/4x of 12, 14, and 16T.
$15/$25/$45 shipped for 1x/2x/4x of 18T/20T.

image

Aluminum 25T w/ keyway, 26T w/o keyway, for 15mm belts, 8 and 10mm bore.
-only have a couple of these.

$18/$30/$52 shipped for 1x/2x/4x of 25T/26T.

MTB bearings

28mm OD, double sealed, 10mm ID (16100-2RS) and 12mm ID (6001-2RS) bearings.
Sellin’ @ cost + shipping.

10x28x8 set of 8 for $12 shipped to the lower 48.
12x28x8 set of 8 for $10 shipped to the lower 48.

Deck Wangs (8===D)

(if you don’t know what these are, check this out)
These are printed in 95A TPU, so they will conform to the contour of your desk, and are strong as hell.

$60 shipped

Flux Deck + Enclosure [SOLD]

I sold my extra one of these, but then I still had two somehow. Now I’ve gone and bought a plutonium, so this one has to go.

SOLD Asking $275 shipped OBO SOLD

image
Yeah, yeah, I jibbed this photo. deck+enclosure is still in the original box, ready to be shipped out.

Gear Drives [SOLD]

2x FB275 hangers
2x Mini Urethane Helical Gear Drives w/ 10mm, 1:2.4 ratio motor gears installed
2x 8mm, 1:2.6 ratio motor gears

SOLD Asking $650 shipped to the lower 48, OBO SOLD











13 Likes

If you want to part out the set ( I doubt you’ll want to ) I’d be interested in those 270s

1 Like

Pretty sure these guys are loctited on, not willing to split them and potentially ruin their freshness, sorry.

5 Likes

Yeaaa they loctite like a bishhhh… gonna need a torch and like 30 mins to kill :upside_down_face:

Would you consider selling the two 8mm gear pinions on their own… cuz the 10mm only work with 6396 MT motors and well they arE trash …

Moving on up to bigger and better but need 8mm

3 Likes

Even most hobby machinist can drill a keyway, don’t let that be what deters you from 10mm shafts.

I’d part w/ the pulleys on their own for like $80 shipped.

Wrong. 6374 maytech also offers 10mm shaft
Flipsky 6384/6374
APS 63100
APS 6374 “I think”

4 Likes

Oooooooooooooo :eyes:
I stand uberly corrected…
Much as Garcias

I still needs 8mm for my 63100s cuz yeeee… :chocolate_bar:

3 Likes

Fixed for you :point_up_2:t2:

4 Likes

:smirk::smirk:
U already be knowin

1 Like

Mooch ass grassy ass

4 Likes

Moo just grrr I see us

4 Likes

“de nalgas”

4 Likes

eggzakery

:wink:

2 Likes

what kv would be good for these ?
running 150mm wheels at 12s, 40mph max

2 Likes

I was gunna say theSe are urethane V4 drives… but I just realized I shipped u berg adapters with yer janux hubs … which would be perfect with these

6380 170kV :upside_down_face::penguin:

3 Likes

I was going to run 120kv cans on kegel 6" pneumatics on the 1:2.4 setup, putting loaded speed at almost 35. Berg adapters would be a great addition to this setup, but low kv for sure w/ these ratios and that wheel diameter unless you hate torque.

1 Like

Monday bump… entertaining offers.

Added some more pics.

Hump day bump. Dropped the price a bit on the drivetrain. Added some motor pulleys.

2 Likes


bump.

2 Likes

Drives have left the building.

1 Like