Got this 1st one, they will look sick on wider setup !
I think the second one is what Andy show us 
can’t wait to see more 
1 Like
Nice, have some pictures of it mounted? And did you find is cheaper?
not that much +/-20€ / tire+air chamber if I remember well.
Can take photo tomorow (3AM here) on 9" rims. Not riding them yet … still have to finish, or start my MTBoard too ^^
2 Likes
Lets see who finishes first, I’m not for a good start since I don’t have any parts yet
2 Likes
^^ I’m not good at this, but if you push me, I will make it ride tomorow so 
jk
I plan maybe 10" rear and 9" front…
Still have to draw and make my drive … could take a year lol
1 Like
Only Trampa ATB or similar but not MBS Matrix II
I quote myself from my thread for more info about Trampa vs. MBS Matrix II
4 Likes
That’s pretty dope! How did you do that?
1 Like
Its on, for me I have to first finish my small board or my ebike , them tear down the hummie build for the battery, vescs and motors
1 Like
I tough it was you 
sorry … it a french esk8r :
airless berg on hub motors !
Edit: will link it tomorow if find it, now I have to go 
8 Likes
Its all custom on the hubs?
And found them cheaper, buy two pieces max at a time or the shipping sky rocket
2 Likes
Stretched 155x50, stretched 6x2, stretched 5x1 have not tested the 5x1
155x50 has a nice short sidewall and tread flattens the best of all pnumatic
Very soft and grippy at 60a
18 Likes
Welp, 2020 looks to be the year of grip and fat ass back ends.
11 Likes
How wide are we going again?!
1 Like
Whats the distance from outer bearing to outer bearing? Whats the minimum axle lenght (minus the treaded part) necessary to mount this hub adaptation?
1 Like
Thinking about this a bit more, the outer hoop loses its support (the spokes). Surely this is a concern? Would it only be a recommended mod for Megastars, since the hoop is aluminium?
3 Likes
I thought it was still connected sorta via the bolts, the spokes are just directly behind the hub rather than located inside
Possibly somebody could model the spokes too for the spacer and the original can stay in the hub?
1 Like
Potentially, but I wouldn’t necessarily go jumping with them.
1 Like
I would. For science.
8 Likes
With it you will need than more space on the truck as well.
1 Like
Not if it doesn’t carry a bearing.