Wanted items cheap or free

Esk8 Parts Market Wanted Cheap or Free
, ,
#1576

If he’s got some on the low budget end I’d be interested too

#1577

I have them. Same price works for me shipped in the US aka no shipping charge

4 Likes
#1578

@olsyke I’m a native English speaker, and I don’t understand what they mean either. I would inquire.

1 Like
#1579

my sisters 24v electric scooter died. And I want to hack in a vesc 4.12 to it as a project.

Does anyone have a 4.12 VESC laying around?
Thanks :slight_smile:

#1580

I have one laying around

2 Likes
#1581

looking for a 12s low amp charger (2-3amps max 4)

eu thanks

#1582

for what board? :slight_smile:

2 Likes
#1583

It doesn’t matter, it will either have a 2.1 or 2.5 mm end on it and he specified 12S. I assume he will just put the end that he wants on the charger if it’s not the right one.

1 Like
#1584

no, it was a joke cause he doesnt have a board…

4 Likes
#1585

ahhh, I missed that :slight_smile:

2 Likes
#1586

Looking for a handful of 9mm x 50mm motor magnets.

1 Like
#1587

(EU Ireland)
Didn’t want to make a thread so
anyone got a decent caliber mount that could be outer mounted (ie motor out not under)

#1588

Maybe Alien power system’s mount

#1589

Anyone have a couple of MR60s in Australia?

1 Like
#1590

[UK][Europe] CHEAP Caliber - Motor Mounts £20 this guy has two.

#1591

thanks but oof, even i have standards you know :joy:

with those mounts they either slip or bend

1 Like
#1592

I agree that they are quite beat up.Though the mounts themselves are good, i have one and its going strong for about 300 km now🤷🏼‍♂️.

#1593

Do you guys know a source for HTD 5M 14T pulleys that are steel?

Need 8mm bore.
Only see aluminum on eBay.

Dickyho only shows the 14 with 10mm bore.
Looking for something cheaper than Janux 30 for a pair…

#1594

If you PM dickyho he’s got some more options on occasion, I got some 13T with 8mm d-bore

1 Like
#1595

UK

Hi all, I’m after 3metres of 12awg high strand, silicone cable. Preferably black but not essential. Will be cut into 6x 50cm lengths.

Also need 6prs of 4mm gold bullet connectors (6 female, 6 male)

1metre (2x 50cm) of black braided sheath (to contain 3x 12awg wires)

Some assorted heathshrink to terminate the able braiding and connectors.

Happy to pay if someone has all these left over from a previous build. Otherwise I’ll turn to eBay.

Please pm or tag me in your reply.
Thanks all.