https://skyartpower.com/ Also has some motors out of California
1 Like
Can you explain this one? I’ve never heard of battery being a limitation for large motors.
It’s only a problem if they type in numbers that are too large.
2 Likes
I’ve had some friends that used 63100s and he said that sometimes they would cut out when he had his smaller battery. He upgraded the battery and said it worked perfect. He had that same experience on some 70120 motors as well.
Not sure if this is ok to post here but I have a yellow poastmote puck shell to give away.
It’s printed by yours truly in PETG, not super pretty but not too bad.
You pay poastage (!) (sending from Germany) and it‘s yours.
1 Like
Technically is fine here.
you could also post it here
2 Likes
Yeah, there’s nothing about a larger longer motor (6380 vs 63100) that would cause problems unless you’re setting them up incorrectly in VESC tool. There are different battery (battery current max) and motor (motor current max) settings to tailor to your setup.
It sounds like your friend had the wrong battery settings, trying to draw too much battery current.
At the same kv, the only real difference is the longer motor will run cooler, which has benefits if the smaller motor hits a thermal limit. It’s not strictly “more powerful”. Read this (Do bigger motors deliver more torque at the same motor current?) for a lengthy discussion.
1 Like
tknk i have a few sets actually
1 Like
I’ve got a uSplit and bag of JST PH2 UART ribbon cables collecting dust, anyone wanna take it for 20 bucks plus shipping?
Thanks for the hint, but the board in question isn’t worth it, decided i will just route usb out of the enclosure
2 Likes
Looking for a cheap 10s or 12s battery. Brick configuration preferred as its going on this tandem bike for a really nice dad on my neighborhood with a 17 year old autistic son. The son loses interest in pedaling quickly 
8 Likes
Got a great deal on a gently loved 10s6p pack from @A13XR3. Thanks dude! Gonna get this family rolling in style asap.
8 Likes
Im in the market for a caliber ll style hanger. 218 to 270 mm wide. Im currently running a TB 228 which isnt in very good shape anymore. EU preferably.
All the best
Looking for a single 15 teeth motor pulley with a 10mm bore, preferably out of metal! 
I think i have a pair meant for a lacroix setup if that works, i’ll have to check.
1 Like
Sure, just hit me up
Anyone in the UK got any braided cable free? Need 2x lengths about 30cm each.
Would rather not buy 6m off Amazon and waste the remainder
Does anyone have a set of 12t or 13t pulleys they would donate for science? (HTD5, 15mm, 8mm bore, with keyway)
I want to do an efficiency comparison between small motor pulleys and bigger motor pulleys.
1 Like
yes, but im on the other side of the world
2 Likes