ahhh, I missed that 
2 Likes
Looking for a handful of 9mm x 50mm motor magnets.
1 Like
(EU Ireland)
Didn’t want to make a thread so
anyone got a decent caliber mount that could be outer mounted (ie motor out not under)
Maybe Alien power system’s mount
Anyone have a couple of MR60s in Australia?
1 Like
thanks but oof, even i have standards you know 
with those mounts they either slip or bend
1 Like
I agree that they are quite beat up.Though the mounts themselves are good, i have one and its going strong for about 300 km now🤷🏼♂️.
Do you guys know a source for HTD 5M 14T pulleys that are steel?
Need 8mm bore.
Only see aluminum on eBay.
Dickyho only shows the 14 with 10mm bore.
Looking for something cheaper than Janux 30 for a pair…
If you PM dickyho he’s got some more options on occasion, I got some 13T with 8mm d-bore
1 Like
UK
Hi all, I’m after 3metres of 12awg high strand, silicone cable. Preferably black but not essential. Will be cut into 6x 50cm lengths.
Also need 6prs of 4mm gold bullet connectors (6 female, 6 male)
1metre (2x 50cm) of black braided sheath (to contain 3x 12awg wires)
Some assorted heathshrink to terminate the able braiding and connectors.
Happy to pay if someone has all these left over from a previous build. Otherwise I’ll turn to eBay.
Please pm or tag me in your reply.
Thanks all.
I just bought a bunch of motor pulleys from @dickyho. Got here fast, as usual even during coronaplague madness. Send him a PM
(Thank you @dickyho and stay safe 
)
2 Likes
Thanks. I did send a message asking if he has them in 8 mm bore.
Whose got cheap MTB ESC enclosure recommendations?
2 Likes
I am looking for:
1… or 4 JST PH 2.0mm 7-Pin Male Female Connector Plug Wire so I can create a UART plug
as well as 20 single row Male Pin Header Connector’s
The lead time and bulk i have to buy of both is leading me here and I’ll even throw you a couple bucks. It is for my current build so that I can get the Davega working when my screen and battery get delivered early next week.
@rafaelinmissouri - I’m also interested in the same steel dickyho pulleys. Must be: HTD 5M, steel, and for 8mm d-shaft.
If @dickyho has them available I’d go for a pair of 13T and a pair of 18T-or-20T.
Looking for (1) Black SR 200mm RKP hanger
PayPal ready and live in the US
1 Like
https://www.ebay.com/usr/switch_elec?_trksid=p2057872.m2749.l2754
good seller of sillicone wire if you end up on ebay
1 Like
I’m looking for a deck and encloser
My battery is 21" it’s a 12s4p
Keep in mind need it shipped to Ireland
Send me pics and prices
It’s not cheap and I’m sorry for that, but the best stuff these days comes from Tim
3 Likes