Definitely sounds like it’s about to be a beast. Love the nyan cat theme and paint job so far. If you want to try again I can send you an og puck case and buttons.
1 Like
Hey I super appreciate the offer! I think I’m good for now though, the scuffed’ish paint job doesn’t bother me that much. 
2 Likes
i’ve found pkps to be far worse offroad then on street. and that 30 degrees is plenty even without bindings, it’s at 25 degrees were you really do need bindings
4 Likes
I don’t wanna clog up this thread, but it sounds like you’re doing something wrong.
4 Likes
I will reply back when I figure out how they do! I ride about 70:30 street and offroad riding, but I’m also super light so might have to try out other trucks down the line to see what I like best. I’m coming from riding DKP, RKP, and TKP trucks on eskates, so these will probably behave very differently than I’m used to.
2 Likes
if you stick some bindings on it you’ll be able carve hard enough to scrape the deck edge on the floor lol (obviously trampa design is different but should ride the same)
no fixed pivot leads to an uncontrolable ride compared to a set of channels, they are comfortable af tho
1 Like
I hope so! I carve everywhere I ride so this kinda behavior would be awesome. I haven’t ordered bindings yet for Voyager but I may order a set of MBS bindings down the line if I want more turn out of the trucks. I’m hoping the trucks will still be wide enough to be stable at speed though, testing will tell.
2 Likes
You can definitely set them up for street riding. It’s also possible to mix truck systems. Vertigo in the front and IR in the back.
On the IRs you can experiment with one reversed cone bushings, cone pointing towards the eye in the hanger. At Trampa everyone rides with bindings, even for street action. It gives you so much more control and leverage.
1 Like
Hmm, never seen anyone mixing different types of trucks on a board before, that sounds interesting. I’ll definitely have to try out bindings though when I get this thing built up.
3 Likes
This looks like it will shape up to be a really cool build… looking forward to seeing it progress. Dig the cool color scheme too!
2 Likes
This is a pretty good suggestion.
You can slap Matrix III just in the front without worrying about a gear adapter.
You see different trucks on street builds here and there.
But really…
Can’t hurt to try different things.
3 Likes
I think that might be the way to go then if I end up wanting more “turn” down the line, just because its a lot cheaper to do that also.
4 Likes
I love all the colored parts. Hopefully you pick up some blue titanium bolts from Radium as well to complete the look 
4 Likes
Remember when ordering MBS to use ESK8BUILD15 which is a really nice hook from them.
1 Like
Ooh I was looking at those! Might be something I pick up in the near future 
2 Likes
I’m hyped for this build. Awesome logo and color scheme
1 Like
Thank you! I should be updating this thread soon as more parts arrive.
2 Likes
Following, love your thinking, should be an awesome build.
1 Like
