Anyone know how to remove the bearings from the bearing adapter? I was expecting a plastic adapter but these are metal without a slip fit tolerance.
Glad usps is back at work and quick =P
@deltazeta good question… Never got around to a bearing change on mine… Ended up going 10mm on mbs trucks with a 3d.print
Not going to run these like this yet… but for fun here’s the 175x50s on hellcat wide. (75mm) hubs.
cc @kook
What tools do you use to get them tires off?
fingers.
I learned a trick though. you have to be pushing the bead inward or it levers and grabs the hub and doesn’t want to budge…
put up a stock “unwidened” hub pik… I wanna compare
or… you add a smidge of dish washing liquid to the bead…
What stuff do you have left?
next to each other you fool!
I need to make a FS thread on Monday BUT 1-6" tire set… Plenty of the 8" tires as pictured and 6 n 8" tubes. Tires will be $9ea and tubes $4ea or a deal for 4 tubes… Covers the ship cost and fees from china. Lemme know if yur interested
I’ll probably grab a set of the 6" tires and tubes and maybe a set of 8" assuming you don’t have any 7"s.
Any chance you have red colored rims?
Sorry no 7", and tires only but yes on all the rest. Rims were just for those who really wanted em when the initial order was placed. Lemme know tho… How bout sum red 8" tires?? =P
I might just get them lol, lemme Dm you
it’s all you get I already had it off of the hellcat wide hub. too much crap slowing me down.
eeeets OK brother… I already know I don’t prefer the “hard edges” of that tire widened anyhoo…
but…
for science you should definitely do a side x side of a metro 155… you know you have to…
note it was a 175x50 from this group buy. the ones you have are 160x50.
yess…