US sale NEW Tb cnc trucks 6380170kv cheaters

[magharees]

@CiscoV

Looking to sell my brand new Tb cnc 220 trucks.
Black in color
Split angle 35/50 degree baseplates
Stock 93a riptide bushings and pivot cup
Asking $130 for the set

I want you to try to sell me these, but before you do could you be a champ and tell me if the dimensions of this revised design over the 218 will fit my spiral bevel gear drive. The 218 will fit even tho made for Caliber II

You can see it fitted to a Caliber

Spiral Bevel Gears Drive

I just used some white lithium grease that I had on hand but the gap is pretty small like can’t see it small… nothing was flying out when I let it go full throttle on the bench for a while. Just some slight leaking during storage, I’ll putting some folded tape in there maybe and check out some specific gear grease unless anyone has recommendations? kind of hard to show the leaky bits in pics… [IMG_20200121_195241] [IMG_20200121_195322] [IMG_20200121_195405]

With a bit of brain damage you can fit them to boardnamics which is plan B if I’m not feeling you holmes

Spiral Bevel Gears Drive

So my original plan for using this drive with boardnamics trucks did not work at all. What I ended up doing was taking a metal file and filing down the top part of the hanger until it aligned correctly and the bolt could be inserted easily. Then I carefully tightened the caliber adapter while checking the alignment constantly. I reassembled the drives and it works perfectly. [image] One additional thing I did a while back and forgot about. I bought 60mm shoulder bolts from McMaster Carr so …

And of course there is the FatBoy CNC a lovely set popped up here a few days ago and @Skyart completely and utterly fucked me over on that one.

I’ll be in the corner sipping something cold & delicious, reading the news & listening to my wife going mental trying & failing to homeschool the childer

@torqueboards maybe you can help with homewerk?