Duel v6 neo box w 190kv maytech 6374 its on the choochoo deck
So I should prolly suck it up and go 30q for the extra $50
I can post them tmw. Good n8.
You need 80 batt amps to power a 31ish inch choochoo deck?
Avoid the LG cells for your purpose?
I was toying w the idea of this cell for the savings really.
2 Likes
i have 40 hg6s if they will work for you, 30 amp cells 3000mah but the size is 20650 a bit bigger, not sure if they will work for you
1 Like
They work but I’m concerned about the extra space they take. I’m also fitting a ttl module in there
2 Likes
I think I’m just gonna stick w 30q. … I have 60 25r sitting around not doing anything but the range would suck
2 Likes
let me know, you can have the cells for 2.5 per cell plus shiping
1 Like
@Skyart I’ll definitely consider it. … if you were to break those into 2s4p packs what would be the Whr rating of those?
i beleave 44.4 wh per 2s4p pack
1 Like
It’s three 3p groups per row. 12s you only need 4 rows, 13s the 5th row is just 3 cells. You can fit a bluetooth module!
1 Like
What bugs me for no reason is why some of them 4x and some 3 lol
You’re triggering my OCD
5 Likes
How long have you been in this place and you’re not rounding yer fuckhen edges
5 Likes
He rounded the first layer lol, but its going in a stiff case so the corners gonna be fine, shouldn’t see too much movement and nothing is going to be on top of it
1 Like
And maybe I use epoxy plates. 
Yeah, a little shell on top and bottom and you’re solid
1 Like
Back to the kweld short. Found out, that the black foot pedal (normally closed)was flying around and touched bus bar and it definitely short, but there seems to be no harm to the fets.
1 Like
Oh good! you’re talking about that 3rd N/C wire that’s not used?
1 Like