SOLD! [EU] WTS Complete DIY urban carver board | 12s5p Tomiboi | 1400€

[rusins]

My brother never rides the new board I built him (he prefers rentable escooters ) so I have no use for this board, which is a shame considering how practical it is for city commuting, and how much time I put into sourcing all the parts and building the thing…

Build thread:

Cumrocket – The prototipo alternative | Tomiboi Honeybadger | 12s5p | Lunas

After I smashed the motor on my brother’s last build, I decided I didn’t want to rebuild the board and would rather make a new one instead with upgraded components. Goals for the build were: reliability dual drive water resistance price For riding in wet conditions pneumatics were required, and to have the motors protected against yours truly smashing them against a curve, a carver deck with raised mounts was in order. My brother really liked the look of Lacroix’s prototipo deck: [image] …

Specs:

• Top speed: 45km/h (pulleys can be changed to increase this if you wish, msg me about it)
• Range: 30-40km (14Ah, 600Wh)
• Acceleration: actually insane, I have it tuned down to 30% power at the moment and it pulls harder than any other board I own
• Size: 105x45x25cm (bounding box)
• Weight: ~13kg

Parts:

• Tomiboi’s 35" Honey Badger MTB deck
• Self-built 12s5p P28A battery with LLT BMS
• Moon Luna 350 trucks with 0 degrees in the rear, +15 at the front. (Total is 50 front 35 rear)
• Bushings are Riptide APS barrels, but I can adjust for your weight
• Rockstar 2s with 6" Evolve wheels
• Idea motor mounts
• 151kv reacher motors
• 18T and 62T pulleys from Radium
• Maker-X DV6 Pro
• Sabre Dynamics ESC heat-sink
• Sabre Dynamics Panel Mount Pro
• Sabre Dynamics light mounts (not installed)
• Davega X
• Puck remote
• Duck handle

Not installed on the board are some 12V LED lights and CNC mounts for the lights to attach to the front truck. There should be enough room inside the enclosure to install this small step-down converter, but it might be pretty tight…

Also note that the sensors were giving me issues on this board, so it’s using silent HFI and running perfectly without them.

This board is really fun to ride in the city, and the grab handle + light weight makes it super convenient to pick up and carry. It really achieves the goals I had set out for the build.

Price: 1800€ + shipping (~50€)

50€ extra if you want a 6A charger to go with it, or 60€ for a 10A charger.

20% discount for local pickup from Latvia

[rusins]

This board would go great with 7" tires as well, like the ones @frame is selling

[WTS][WW]Generic 175*50 tire with tube set 50bucks only?

each set is 4 tires + 4 tubes 50usd shipped each set NOT 3DAY SHIPPING, only promise ship by air i ship worldwide can also contact me via Telegram @frame_b022 [20230916_141011] [20230916_141311][20230916_141319] if u ask why these are cheaper than HOTA, because these are thinner than HOTA tire, also side wall flex more than HOTA. I may bring back the HOTA in the future, but not right now

(With 8" You start to get wheelbite on the sharpest turns, but it’s a single-stack enclosure, so no need to go that large)

[Rudi]

@rusins

My brother never rides the new board I built him (he prefers rentable escooters )

Sell your brother.

[Sacred]

Heart wants but wallet cries. Bump and vouch for this guy

[rusins]

Price drop to 1800€.

I still don’t have a job and I don’t want to starve to death lol

[rusins]

Price drop to 1700€. I can’t pay my heating bill and it’s getting cold here

[xsynatic]

@rusins

I can’t pay my heating bill and it’s getting cold here

You have a bit of wood and some batteries there

[magharees]

Man this would have been gone so quickly a couple of years ago, when did the whole community become poors? Have you tried shudder Facebook?

[rusins]

Thanks for reminding me, I should! Heck, even ebay at this point, cuz I’m losing a lot of money on this deal.

[JesseM]

No offence, but your brother is a dick…

[Milos]

Such an awesome build! I don’t think I have the budget for it, but since I’m currently building a duck themed board, I’d be pretty interested in that handle

Idk if it would make sense for you to sell parts separately, but maybe if somebody would like to buy it without a handle for a small discount? Haha

[rusins]

You’re not gonna believe this, but… I actually have a spare duck handle

30€ + shipping and it’s yours

[rusins]

Okay, one last price drop, now to 1600€.

I have a hunch I might get a job soon, so if that happens the price will be going back up lmao. Someone will definitely buy it for more than I’m asking for when Spring comes round.

[magharees]

me holding out for the Black Friday €1599 offer

[rusins]

I got my first paycheck today from my new job.

Price bump back up to 2000€.

Ya snooze, ya lose

[SalamToU]

Deal lurkers btfo

[rusins]

Bump! Anyone want to spend their Christmas gift money on a cool board?

[rusins]

Bump! Price drop down to 1800€

The weather is nice, what are you waiting for?

[rusins]

Price drop to 1400€

[blaz.ferlic]

Very nice build. Can you tel me more about the enclosure? Looks like ABS.
Any more pictures of the inside/battery build?