Sweet ! Fit nicely !! I also like the tiny Fox 3dsas box on the rear 
The setup look strong. Custom rear-handle-motor-bumper ? Awesome 
Can you tell me more about those ? What copper type did you use ? Please make a build log 
What’s the advice on fastening the enclosure to the deck? How do you keep the box stable and secure while the deck flexes and prevent any stresses being applied to it?
3 Likes
Aluminum box mounted on rubber shock absorbers
can’t provide links sorry…
self built 12s6p with 30q’s and 100A smart bluetooth bms, 100A main fuse and 8A chargeport fuse
battery barely fits in the box. I put some foam and a thin sheet of teflon under the battery
10 Likes
12s3p 15ah hardcase lipo pack with a charge only smart BMS in a pelican 1300 case. Flipsky dual 6.6 in the center box. A 60 volt to 12 volt step down converter and a gps skate tracker are also in the same enclosure. I’ve got this build up to 32mph, and it has lots of power for off roading. I cleaned it up before I took these pictures. So far it has been waterproof, but I’m still not confident that water won’t enter through the cable glands. Overall this build has been so much fun to ride, and I can’t wait to get moon’s gear drives on here.
I cleaned up the battery wiring BTW.
7 Likes
Trampa 9" wheels, 5.9:1 gear drive
Top mount 20a/240w buck converter and rocker switch for LED under lighting 200ma/per light,800ma total draw. 5v3a waterproof usb connector and DC/DC tapped into main battery for USB recharging on the fly. Still waiting for the 3000lm 6" headlight to arrive
Using ratchet straps to hold the case on, and threw 1/4 inch neoprene on the bottom of the case for additional grip
Powercon Charge Port (charging at 4a)
13s5p self built with spot welder and nickel strips using Samsung 25r cells Using cell spacers, shown before adding neoprene padding on top and before charge port was mounted
SKB Hardshell waterproof case. All thru holes have been hot glued
7 Likes
10s2p 18650 battery
Pelican clone case for vesc
Uploading: C0C2673A-DB44-4A94-89FD-DE83C01221BD.jpeg…
3 Likes
12s9p - lg hg6 20650s
Made by @BenjaminF of @DRI
Enclosure used:
https://www.amazon.com/dp/B081LZYNHN?ref=ppx_pop_mob_ap_share
12 Likes
Latest iteration of top box and I think the final. Can’t get much smaller. It’s a nice size compared to a year ago lol.
12s7p polycase
12 Likes
Nice case! What is it?
Enclosure looks great! Which one is it?
1 Like
12s8P Molicel p42a pack with smart bms stuffed into a trampa monster box. Obviously no room for esc in there. Built by @BenjaminF
All seams were sealed and taped in the box. Very snug fit. Faaackin perfect!
11 Likes
33,000 mah, must be pretty heavy, may gets some moli 28a when back in stock
1 Like
Love that box! link?
Barely fits my 22,000mah 7s lipos but 6s should fit easily
3 Likes
You fellows using the tie down straps instead of inserts… Link me a strap you like!
I’m guesstimating 26" is about what I’m after. Ratchet or velcro? Planning on using a non skid sheet under it.
These are pretty burly and useful. I’ve got one of the Onetigris straps holding up a 10s3p battery/enclosure under a board, along with the TFY elastic strap to provide some tension, so should also work well for a top mount.
2 Likes
Ooh that looks interesting but I’ve got a bigger top mount box so it would need to be a good bit longer.
2 Likes