@fujio001 seconded, WTF and I now realize I have needs I didnt have yesterday
1 Like
Pic for reference here
5 Likes
Still cant work out size. Do u have a small, regular or large banana if u don’t mind me asking 
4 Likes
“Mini” Psychoframe, limited run.
Here’s his build:
Photos (and design/machining) credits go to @NoWind entirely.
Jens is an artist. 
17 Likes
I think a road-specific version would be cool. Maybe a space in the middle of the deck that is slightly lower where a battery case, like a Pelican , can be mounted.
2 Likes
So tidy!! Shots inside enclosure?
So many questions…
2 Likes
What’s the width of those hangers? Would they be interchangeable with generic dkp/tkp baseplates?
1 Like
It’s a sweet little board… (Not that little)
I have a 12s2p p42 a, smart BMS and Unity going to TB 190kv 6354s.
3 Likes
Is it a darkside deck? Been frothing on them for a bit
1 Like
It’s the loaded Omakase.
I think the Rayne deck I had yonder back in the day was a Dark side 34.
The Omakase is a totally different beast.
Pretty much flat compared to the Darkside.
I had the Brightside… My first deck swap apparently…
Its on my Surron, it’s alright but looking at the ebmx x9000
1 Like
These aren’t obtainable by chance are they?
1 Like
Only one or two sets of these around.
Are there files available if I were inclined to make my own?
I have an avio collecting dust because no gears 
I just need the wheel gears. Those are the specialized cut.
Good luck getting somewhere to make herringbone gears
2 Likes
It’s really not that bad. If anyone just added a central runout groove to a herringbone gear, the tool wouldn’t collide with the other spur set.
You can also interlock two opposite spur gears and just leave a small gap in between to allow for clearance.
Wust patented a neat herringbone design that offsets the spur pattern so that there is a gap for this as well. Honestly shocked no one has put out a 2 spur herringbone setup with how thin our gear drives have gotten. Bet Apex is on it.
6 Likes
please tell me these will be on your website soon 
i literally just checked your website yesterday to see if you had 6355s available
settled for maytechs cause i couldn’t find em but i’ll snag 4 soon as they’re up 
1 Like
They are! Only 3 sets on hand though…
ah poop
I’ll keep an eye out for if/when more are in stock 
what kv will they be?
1 Like