I’ve been thinking about using a THICC balloon/condom, (ribbed for her pleasure) and using some expanding foam to make it conform to the magnets…
Epoxy…? Isn’t that kinda risky to make a board out of?
Don’t know Bro. That’s what he using? But there are other ton of manufacturers who had similar building techniques applying diverse methods for glossyness… 1166 Longboards, 313 Skateboards, Antidote Longboards, etc…
It looks like bits of wood cast in a block of epoxy, like a river table…I am not by any means an expert but it seems like a weak point
It’s fucking cool though, I want to make one so bad
Wood glue is stronger than most of the woods it goes on. I think properly applied epoxy would be fine given how porous wood normally is.
I’m liking ALMOST everything about Orange one…
Need more wheelbase, shooting for 42"
I don’t know about the gaspedals, Probably design it with progressive concave or maybe simple radial concave
I’d like more drop… I need about and Inch (yeah, that’s what she said…)
and about an 1" of rocker, (camber front to back) to aid in torsional rigidity…
concave top, flat bottom with wire channels between the stiffening spars so I can make simple bullet-proof enclosure…
Honestly I’ve been beating my head against reality trying to make a alum. monocoque esk8 race-board… this is almost there!
off to Fusion I go…
@surfnacho If’n I can get you the shape I want, can you CNC me a wood mold to press this against?
From 313:
Vorgaben: Alex Dietz, Boris Schinke
Konzept: Peter Scheerer
CAD/CAM: Verena Völkel
Konstruktion: Peter Scheerer
Fertigung: Peter Scheerer, Verena Völkel
Grafik: Verena Völkel
Concave: doppelter Löffel progressiv, Welle, Gaspedal, hinten: „Pushedge“
Längsprofil: Wavecamber (5º – Rocker – Camber – Rocker – Kicktail – 0º)
Handrails
Doppel-Diffusor
Schaumkern 10/5/15 mm
ABS Nose + Tail, Multiplex Inserts
Lagenaufbau: 6 Achsen Glas / Carbon
Oberfläche: PU-Lack, klar
Hitzegehärtet
1550 gramm (3,41 lbs)
Länge: 1000 mm (39,5″)
Breite: 265 mm (10,5″)
Radstand: 750/771/792/813 mm (29,75″/30,5″/31,25″/32″)
Input: Alex Dietz, Boris Schinke
Concept: Peter Scheerer
CAD/CAM: Verena Völkel
Construction: Peter Scheerer
Manufacturing: Peter Scheerer, Verena Völkel
Graphic: Verena Völkel
Concave: progressive double-spoon, wave, gaspedal, „push-edge“
Profile: Wavecamber: (5º – rocker – camber – rocker – kicktail – 0º)
Handrails
Double Diffuser
Foamcore 10/5/15mm
ABS nose + tail, plywood inserts
Layup: 6-ax glass / carbon
Topcoat: PU-varnish, clear
Heatcured
1550 gramm (3,41 lbs)
Length: 1000 mm (39,5″)
Width: 265 mm (10,5″)
Wheelbase: 750/771/792/813 mm (29,75″/30,5″/31,25″/32″)
I might need you to make one for me…
the price may be your soul young jedi!
I haven’t seen maguns in a while.
I had to do it.
Also had to pull everything halfway out my pocket to make it apparant enough what it was in my pocket.
ziptie and a variable speed cordless drill…
Nice hummie build mate!
Deal
Are those SL-200 lights red or white?
yes…red
How do you like those? Are they a diffuse red or a spotlight style red?
I have only tried the white SL-200 and the red and white older style.