Gravelā¦ and speed, a lot of speed. In short I took this corner right here
Doing 30-35mph. Happened to be a lot of gravel that I couldnāt see due to a trees shadows blocking the light from coming to that corner.
One sec Iām up the next the rear trucks fishtailing and Iām on my back 
Shit. Yep. That will do it.
What is this alchemy?? Fiberglass and black shit and glass fit on top??
No humans were injured, but 600 bicycles were destroyed. They think. They still havenāt been able to reach them.
Lady walking her dog said she walks by multiple times per day, and the last couple weeks she saw a whole bunch of bricks on the corner all cracked and broken.
Used to be Lemp Brewery building #20
Ouch doood, you got pizza even you are padded up like a boss?
@LEE š¼ Pictures and Nothing Else!
I applaud your innovation but hub motors on a belt drive board.
Yep. Basically just skinned it with fibreglass, black epoxy and glass frit.
Unfortunately, some of the epoxy settled over night and buried some frit, so I took another pass at it this evening.
Even worse than that, i had some slight drippage that found itās way to the underside of the deck 
Thereās gonna be some serious sanding 
This time itās a board to test whether you can use Hikokiās battery. Prototype.
Eventually we would like to use this battery to make a better board.
The test worked. The 18650 version of Hikoki is a Samsung 25S cell 10s1p or 5s2p. Connects in 10s and outputs 20A in 1p.
With the Hobby Wing ESC, you can run with just one battery.
Iām kicking myself since I forgot to put on my armored jacket Wouldāve saved my elbow but I think Iād still have a messed up hip because it doesnāt have hip protection. Hopefully my LR gear finally comes, been a very long adventure working with them to get my stuff shipped out 
oooh i did that too! will do pictures in a bit, the coarse fibre stacks so fast, makes the board stiffer in like 3 layers.
Inserts were already in deck so i put in some tapped rod, they are a pain now to get out 
Iāve got the S10+ too, love it, best android phone Iāve ever owned
Same here, S10+ gang gang.
Was having some fun with the replacement board before sending it back tmrw. Iām happy mine has motors 
Is this the model from their site? Iām currently modeling the whole thing and this would help me check references if soā¦
Yes, it is! Downloaded the stl, threw it into Cura, and violĆ 
Hell yeah dude, I was literally about to start working on those little slotted holes
I need to print a slim back, done any mods yet?
Havenāt done any mods yet, just wanted to print to get a feel of the remote before/if I buy one 
Donāt have the internals, just got shipped a shell to see what I could make work.
