I heard Andrés cut a bitch who forgot to bring a loopkey to a key party.
3 Likes
I feel like this would be a smelly ordeal in the Esk8 world.
1 Like
I have a feeling it might be BMS related 
do you use charge only?
What motors are those?
2 Likes
Roxxy D63-72 with triple ball races and 200kv.
2 Likes
Now back to the bench to repair what you broke for the photo shoot.
Which module did you use to get the Remote Signal to activate the lights (relays) ?
Is there something that already exists or did you use something like a car remote ?
Cheers
@glyphiks
How did you get that cool looking flat red color is it just resin or did you add something thanks 
1 Like
Its just resin with pigment added. And multiple layers of fibreglass and clear resin on top.
1 Like
This board is awesome, dood.
4 Likes
Yes, two actually, one LM2596HVS that can take the full voltage and another LM2596 that can do constant current to drive leds
Will give a try to some caps
Charge only, FlexiBMS ftw
I have the channel 1 one the GT2b connected to an Arduino Nano, and it reads the channel and controls the light, the DC/DC converter I’m using has an on off pin that can be used to turn it on or off without relays or additional transistors
4 Likes
It’s the PWM reading, it should be stable 1875 ms, but as soon there is current on the motor it goes all over the place, but should be easy to solve
563
1
980
1
1837
0
1048
1
91
1
317
1
400
1
448
1
333
1
1876
0
1882
0
1874
0
1875
0
1882
0
694
1
1875
0
794
1
1459
1
433
1
1004
1
1792
1 Like
That would almost include, a knockoff gorilla pod, a pixel 2, a 50mm lens mount adapter and my spine, no reward without risk yolo.
1 Like
I didn’t. I wish I could. Europe I’m afraid ($$). For now a dream… £170 each 
(but they are one of the best build in the market @NoWind uses them)
1 Like
WoW da price has raised totally … bought my last ones for 110€ PCS
BTW its not the really same motor, Horizon hobbies DYMOND is discontinued
4 Likes
Yeah, I noticed. These are Multiplex.