I think thatâs really up to you - most people like to have it separate I guess, as your standard charger will be a DC plug an you probably work with a Xt60 for usage. You wonât do both simultaneously so I guess itâs just a matter of personal liking
3M belts will be impossible to service â because ALL esk8 parts on the market are 5M â and are much more likely to skip when braking.
If you want to build a board that is unserviceable, then buy a Meepo because thatâs almost the same thing. You canât really upgrade or change anything on those except replace the entire drive train, which is a situation you will get closer to by using 3M belts. Also 3M belts suck for braking.
@Niklas why donât you just grab the exway flex? at 500 euros, you donât have any margin for error and even if you got everything perfect, you wonât be able to match the exway flex. look around for a coupon and you can snab it for ~500 euros
well. thatâs fine then. It can be rewarding doing DIY but remember this. You wonât build a board better than the exway flex for 500 euros. good luck