A litle bit of help wiring up this old 10s Bestech d596b would be appreciated.
-
Solder battery negativ to B-
-
Here’s where I get a bit confused. Never had a bms with positive wire go to a bms… Currently my battery pack has balance wires from right to left. Starts with 0-4.2-8.4 … up to fully charge 42v…
But from diagrams found online, it seems that for the last pin (11) should be positive wire from last cell group (+42v)…?
So should I wire it from first cell 4.2 up to 42 and for the last pin (11) wire positive to it?
-
P- to load neg.
-
C- charger neg.
Ok. Couldn’t upload pics or share links but the bms is bestech hcx d596b 10s charge and discharge on different port.
Appreciate your help 