Hey, one of my new boardnamics motor makes an unusual sound and I can feel a small amount of friction when I’m hand turning it. I guess my 2 questions are:
Will it make matters worst if I run the motor detection? (The thing (?) rubbing is going to get caught and destroy the motor?)
Apparently, when the phase wire are touching you create resistance ?! I tested again with the wires taped off and I can’t reproduce the issue. ty otisthebigcow on discord for the knowledge!
I’m working through my build with a demonseed 42 deck and the next thing to get is the trucks / motors and mounts.
I am planning on 6374 battle hardened at the moment and want to have the onsra 115mm rubber airless wheels.
Question is will boardnamics 220’s be OK with this deck / wheel combo without getting wheelbite as rkp layout. Deck is drop through but don’t know it can be top mounted with the boardnamics adjustable base plates or if clearance would be fine drop through.
Originally wanted the motors forward facing but not sure if that’s an option either?
hi guys about to buy 2 x 12s li ion smart bms from llt power. the one they have is this. but it has 2 B- and 2 C- cables. i assume just removing one of each would be the best thing to do? also going to wire for charge only, done it before but it was a p- not c- are these interchangeable for wiring a bms for charge only?
Cheers, I’ll keep researching but not a combo I have seen. Was advised to go rkp on here so that’s why I’m looking that way. Did see the 270 hangers but want it to look more street like and this will stick out quite a bit. Can you use 3d printed risers OK as that could be an option to try to get the right fit?
I don’t know how 3D printed ones are but I suspect it could be anywhere from okay to terrible depending on material used, software settings, and print quality.
Can someone explain how wedge risers work? Would they not bend the truck bolts? (causing weakness). What about on Apex Airs where you can’t spin the nut on? How do you turn bent bolts?
About a 1/4 way through @rafaelinmissouri journal thread and at one point he used tb218s on his demonseed with clouthwheels so this gives me hope. Not much clearance but looks like what I’m after