I have haggyboard hub and boosted mini.
I try to find some hub with kegel core that can fit boosted mini
just 3d print an adapter
He has fast turnaround times for regular parts listed on his site. I got away with a 48 hr request to part in person, but I’m a local kid.
Yes, available in “Fiery Red” and “Picatinny Black”, ship within 2 days.
Fyi, the TB DD hubs fit the new/current style Elofty adapter
Why would you want to put the elofty adapter on the TB DD? Probably I missed something, I don’t get it …
I meant the TB DD version of the Janux hubs of course
Those also fit the new style eLoftys with Kegel adapter. As you might notice, Janux sells TB, eLofty and Carvon versions.
Got you, I think: the Janux hubs for TB DD also fit the elofty DD, correct?
On a side note, I actually had to find out recently that out of the box only the Janux Quattro (https://www.janux-esk8.com/product-page/janux-quattro-torqueboard-direct-drive-hubs) but not the Janux Quattro 4.25’’ (see https://www.janux-esk8.com/product-page/janux-quattro-4-25-hubs-for-tbdd-or-elofty) fitted my TB DD adapter.
Using a 5.8 mm drill bit I should be able to fix that, however, I haven’t tried yet. Any body else had similar experiences?
Janux Quattro hubs holes were machined after anodizing.
Quattro 4.25" hubs were completely machined (including mounting holes) then sent for anodizing. This created a layer of anodizing dye on the surface hence making the holes smaller. Can easily be remedied using a 5.8mm drill bit to scrape off deposited dye layer.
Yep, sounds like an easy fix. Will try soon. Thanks for explaining. However, perhaps you may want to consider following the same procedure for the Janux Quattro 4.25’’ as for Janux Quattro in order to avoid the drilling part for your fellow eskaters in the future, i.e. first anodizing then machining.
Absolutely! Did not realized it how much the anodizing dye layer could deposit such a thick coating on the parts.
Just fixed it using a 5.8 mm drill bit - fairly quick and easy.
Thanks @Arzamenable! I have been looking all over to see if evolve tires will fit these hubs. They look great! Out of curiosity, have you tried the 6" evolve tires with them? How do the 7" run? Are you using eLofty or TB?
Don’t have a set of 6" evolve tires to confirm their fit, maybe my larger size hub? https://www.janux-esk8.com/product-page/janux-quattro-4-25-hubs-for-tbdd-or-elofty
I had interpreted his photo above (with the Evolve tires) as mounted on the smaller Janux hubs. Looking again, it may be he has them mounted on the 4.25" wheels. @Janux-esk8 does that seem to be what’s in the picture?
After some sleuthing, it appears @Arzamenable bought the 4.25" hubs from you on or around Jan 17th according to his note here. With the shot above from 1/22, I’d say we are looking at the 7" evolve tires on the 4.25" hubs.