Alright trying to get this carver back up and running.
I had a spare ESC and motor luckily so, swapped those in. MakerX needs me to send in my other D100 for repairs so need to get on that. I put in a pass through usb c port since it seems like only USB connection works at times.
So excitingly my milled adapters came in early. They’re pretty close but still had to dremel here and there to make things fit properly.
Was to eager when tapping and snapped the bit. Had to run to the hardware store to get more taps, and go slower.
Mounted and loctited, time to let things cure.
