Thank you
no way
3.6V per for storsge? shouldnt it be 3.8-3.85V per cell?
37 - 38V and no
If you unplug the BMS, then 35.5V
1 Like
Nominal voltage is storage voltage.
nominal voltage is the average voltage rhought a cycle of the battery
nominal usually doesn’t mean storage
ever balance charger i’ve used has storsfe mode set to 3.8V per
1 Like
oh ik, ive always used it as a reference for storage.
I have it at around 36 with the bms unpluged is that a problem?
Probably not, but I would bump it up to 37V in case the BMS uses some charge.
36V is technically fine
2 Likes
How would that work if its unplugged?
Sorry, not enough coffee
Yeah 36V is totally fine without anything connected.
2 Likes
I was thinking of adding 12v light to my board and / adding 120v outlet so I can plug thing in to it. Any info would be great or if you know a good thread that would be great also.
I have a 10s4p p42a battery. My bms has I think a 13 amp output which is currently being bypassed.
1 Like
Finally finishing up my board. There is still a few thing I want to add (light and what not), but I am going to add those later. Thanks again for everyones help I literally could not do this without you guys.
3 Likes
Can you guess what the color sceme is based off of? Im thinking of making a build tread (or whatever its called) when I put the board back together.
3 Likes
Its the based of the space shuttle
I’m still waiting a longer belt so I can get better clearance.
Looks killer - nice work yo!
1 Like
Do you think it would be possible to run 120mm cloudwheels on this set-up or should I get 105mm instead?
Remove the roadside bushings. How far is the wheel from the deck at full lean? Add that to the wheel diameter currently on there, and that should be close to that maximum size you can accomidate.