How to route loaded vanguard deck?

[Meeep]

Board of Theseus | 10s4p 30q | Unity | TBDD | Flipsky VX1

I did a full teardown, tune-up, and routed the deck for some better aesthetics. I should have taken out a little more material but I can always do that later and I didn’t wanted to compromise the deck. Also rotated the Tb 110’s 78A. Interestingly after ~7 months, I could notice a small difference (maybe 0.5mm- 1mm) in diameter between the front wheels and the drive wheel. Cleaned and lubed all bearings. I also unscrewed my front axels and re-loctited them (I didn’t even realize they were removab…

I went with a shallow route with flat braid. Nothing fancy, no extra reinforcement. I should have taken out another mm or so but it will do for now.