Noteworthy.
The D100s DV6s DV4s, have been modified to normally open buttons (located on 3pin port).
While the D75 DV6pro etc. using normally closed buttons on 8pin port.
Normally open buttons have more options！
5 Likes
?
But my d100s is normally open (NO) button? Please clarify
I also tested the button and confirm it is NO type
2 Likes
Sorry. Typo. D100s button is normally open.
1 Like
33x90 This one is the latest.
You need to manually wire them together. 5V and GND are connected in parallel.
ISP，In-System Programming. For example you can use this button to download the firmware.
Can you elaborate on how this works exactly?
2 Likes
- Run VCP_V1.4.0_Setup.exe to install the driver
- Power off the board, Plug in USB
3, then press and hold the ISP button on the board - Power on the board again
5, Release the ISP button - Run update_fw_usb_dfu. .bat
- restarted
4 Likes
I’ll create a tutorial later.
6 Likes
This might have been answered somewhere, I can’t find it. Is the dv4s erpm limit 60k or greater?
1 Like
This case looks really cool, I guess I’m not the only one!
1 Like
The vesc4 firmware limits the maximum ERPM to 200K.
1 Like
It’s below vesc4 spec?
That’s gotta be a typo right?
2 Likes
Yes 200K😂
That’s more like it lol
In that case, that’s excellent. I suppose this is part of the most recent firmware updates
1 Like
These are the default parameters of the vesc firmware, I didn’t make any changes. The DV4s only modified the shunt resistance and added switch button.
Do the new D100s have a new abs max current? The D100 currently has 150a right
1 Like
Yeah it was 250 amps from the unit I had