This should work, the same goes for car tyres! (:
1 Like
new bergs? whatâs the difference
2 Likes
13s focbox or what?
1 Like
afaik, new stock? haha.
1 Like
In my experience the only fix for this is to switch tires and tubes. The tires and tubes that Dave uses on 6 Shooters are pretty much un-killable.
4 Likes
Lol unless you have the touch of death like @Kellag. He killed one his very first ride!
4 Likes
Confirmed. One FOCBOX self-destructed yet the last replacement is holding up.
3 Likes
youâre right on the money (as always). The Mastercarve rolls down concrete steps without fail.
Well, BMS failed haha
5 Likes
I ran a 6 shooter tire flat once, didnt realize for a few minutes. Another time I was swapping bearing in a 6 shooter, had to deflate the wheel and take it apart to get the bearing loose. Forgot to fill it up and me and Tim were 100 yards down the road before I figured it out. They are solid.
7 Likes
and news awesome coloooooooooors 
2 Likes
Man would be cool if there were herringbone gear drives for eMTBs, to fit MBS/trampa trucks.
2 Likes
Pricing options updated. Available on post #1
Extract of Post#1 below:
Pricing Table:
- Prices listed below includes PayPal Charges and excludes Shipping. For shipping charges, refer to the table below.
| Package: | Item/s | Est. Shipping Weight (KG) | Price (NTD) | Price (USD) |
|---|---|---|---|---|
| A | 2WD MK2 Avio Drive | 1.76 | $13,300 | $439 |
| B | 2WD MK2 Avio Drive + Kahua Trucks | 3.74 | $17,200 | A + $129 |
| C | 2WD MK2 Avio Drive + Bergmeister Wheels | 3.85 | $17,500 | A + $139 |
| D | 2WD MK2 Avio Drive + Kahua Trucks + Bergmeister Wheels | 5.83 | $21,500 | A + $271 |
Estimated Shipping Cost:
- Shipping costs listed are in USD.
- Kindly use the Est. Shipping Weight (KG) listed in the Pricing Table above to estimate what shipping to your country will be.
- Bundling / combined shipping options are available. PM @Avio if youâd like to arrange this. Do note that bundled shipping can be significantly cheaper. (e.g. A bundle of 5 Package Aâs shipped to USA will cost $106 as opposed to $195 when shipped individually.)
| Shipping Weight (KG) | USA | UK / Europe | Australia | Asia |
|---|---|---|---|---|
| 0 to 2 | 39 | 39 | 33 | 24 |
| 2 to 4 | 53 | 53 | 50 | 35 |
| 4 to 6 | 70 | 70 | 66 | 44 |
| 6 to 10 | 106 | 106 | 99 | 63 |
| More than 10 | PM to enquire | PM to enquire | PM to enquire | PM to enquire |
How to purchase?:
- Simply reserve a set by filling out the order form here and we will send you an invoice when we have ready stock!
- We are currently ahead of schedule and expect our drives to reach us by mid-Janâ 20.
- Do note that due to our limited stock, the drives will be sold based off the google form on a first-come-first-serve basis.
11 Likes
Does the current batch have holes for mounting the AMT102 capacitive quadrature encoder?
Well⌠you could make an adapter for it. Haha. It has a 44mm pcd mounting pattern.
3 Likes
Time to fire up the 3d printer!
Please enlighten me. What is this and what is it used for?
1 Like
Itâs a quadrature shaft encoder that hopefully makes the vesc suck a lot less.
I have not tested this.
Most VESCs will most likely need capacitors removed to properly interface with it.
Will also work well with the ODrive.
2 Likes
Interesting. In what ways does it make the ESC suck less?
1 Like
Bruh wtf lol
1 Like
Or do you mean suck less power? Because Iâve been pretty happy with the mid-higher tier ESCâs. Would take quite a bit for me to want to go through the additional trouble.