Installed and turned on once
Would like a button so it’s not on for 10 minutes at a time. Maybe later?
Installed and turned on once
Would like a button so it’s not on for 10 minutes at a time. Maybe later?
Any feedback?
All good?
Already popcorned?
Not arrived?
Mine has not arrived…im guessing its going to get returned back and resent again due to the wrong address
For reference this is the connector used on the antispark
https://www.mouser.com/ProductDetail/Molex/53048-0610?qs=%2Fha2pyFaduhtsJX3CybgkgcefyLMOnB4p1lzoAXHzBw%3D
Looks like these might work.
@skate420 @A13XR3 @BenjaminF @Zach @Alpacaslapper
@stratoglide @Skyart @physicsman99 @DEEIF @Arzamenable @annihil8ted @scepterr @annihil8ted @Bobby
Any updates and feedback? Who has not yet received their antispark?
Thanks.
Recieved, but not installed yet.
Unfortunately I was not one of the lucky ones! Avidly watching though
Not received still
I received mine. After a small issue that @Gamer43 helped me rectify via PM, it seems to be working and I will be testing it on the roads shortly.
Not yet installed, still working on the battery for this build.
Received but not yet install. Finishing up battery before it goes into the board and the rest of the wiring
Received. Installed. Functional. No issues to report yet.
I have noticed it’s pretty easy to kick on. I can turn it on by spinning one wheel by hand
For real, it is on the ‘bench’ now.
Its intended buttonless use should compliment the intent of this little build, stealth.
The the AS switch on the board currently is rated only to 10s.
Excellent documentation.
How fast must one kick? I have only cross country and Esk8 legs.
Did it turn on on the bench?
Negative, and I did try
goddamn it, it means the firmware isn’t on it.
You can send it to me for programming, I’ll pay the shipping fee through USPS.
Sorry about that.
Wait, I was stone cold sober until, like an hr ago. Let me resort to the instructions. They are most coherent. I took a time lapse of my goofy assembly.
It took forever knowing I’d eventually post it and be judged