Cherry Angio | 31.5" Old School Pig | Xenith 2.1 | 12s2p P42A | Dual FSBH 6354 190kv |

[rosco]

Read these first.

VacuumBag-7th-Ed.pdf

Fibreglass : Mold and Enclosure Making : How To and How Not To

So if you are thinking of making your own fibreglass enclosure, great! It’s heaps of fun. But it is a MASSIVE amount of work. I totally underestimated just how much work it would be, but the process was satisfying and I learned a lot. There are a few different ways you can create a fibreglass enclosure, but I am going to focus on the way that I did it here, and hope that others can share their experiences as well. PART 1 - Making the Mold I decided that I wanted to make a negative mold for my…

DIY Fiberglass Enclosure How to & Tips

Segmented Carbon Flex Enclosure for Trampa Urban Carver

Loaded Vanguard / Tesseract / Jet Spud: Vacuum Bagging Boards &...

There’s also some pics and rambling on my workshop thread here RAWshop - Ross’ Alliteration Workshop - Workshops - FreeSK8