I like this mix just makes sense for 8inch
You r definitely getting a A+ on your homework 
@Skyart rides so many different styles maybe he can way in 
4 Likes
Seems like a good set up
3 Likes
I would prefer 5.2 with 190kv. Similar speed but more torque.
3 Likes
choice
16 Likes
I went 4.6. Was very tempted on the 5.2. My build will be 16s using 140kv motors. Using 8 inch tires, the calculator estimates top loaded speed to about 39mph. I want to comfortably be able to do 30 and could imagine the occasional spurt to 33, 34, maybe 35. I try to build in about 5mph of head room on my top speed calculation because things get weird when you hit the limit at that speed.
7 Likes
Has anyone had a bad experience decreasing the width between the wheel and gear drive? I’m sure the wheels flex so it can’t be too close or else youd get some rubbing.
2 Likes
I have 220s on my evo and they feel wide enough.
1 Like
@Boardnamics I went to order and thought I saw a banner about free shipping in the US for orders over a certain amount, but when I checked out there was no free shipping option. Perhaps my German billing address and US shipping address is effecting it?
1 Like
That’s interesting. If it’s being shipped to the US then yes it’s free shipping over $120. Maybe I can refund it afterwards? Strange
4 Likes
OK, so it should just apply automatically at check when I have $500 in the cart and zero out the $30 shipping. I’ll let you know if it doesn’t work.
2 Likes
All good, I re-checked out with first putting the US shipping address before the billing address and no shipping was charged. Just ignore the shipping address in PayPal
6 Likes
Are the 145 hangars gonna be up on the site soon? Planning to order some stuff with those hangars.
3 Likes
Any plans on making a TKP or DKP trucks in the future?
2 Likes
Yep I’ll get on that. There’s a few items I have not listed yet.
3 Likes
No plans on that atm.
1 Like
Nah he’s gotta innovate
Thinking more like QKP (quadruple kingpin)
or some full suspension trucks 
4 Likes
We already have Queen Pins and 0, 1, & 2 Kingpin designs. Why not a Jackpin or Double Jack Pin?
Basically, you could eliminate side fumbling and reduce sinusoidal depleneration if you had a cast baseplate of prefabulated amulite, surmounted by two malleable logarithmic case-hardened Jack Pins in such a way that two spurving bearings were in a direct line with panendermic semiboloid slots.
15 Likes
Add a ventricular dingle-arm and I’m sold.
6 Likes
We’re looking for innovative ideas. 
