Sorry I think you mean they 18650 cell. We have some in our factory. I measure later.
Damn! I’m too anxious, couldn’t wait.
These cells seem to be top of the notch these days, even better than the 30T and 40T together
Hope they come balanced
8 Likes
I found every seller listing slightly different size tolerances. Liionwarehouse had the best dimensions. My cells from batterybros were pretty consistent in voltage. range is 5.530-3.545 (photo at *Nutty 100-40* Subsonic Century AVIO mk2 P42A 13s4p)
I’ll measure a few cell tonight (with plastic calipers)
2 Likes
5 cells pretty much 70mm long right on the money. 21.3mm diameter.
Alan, one thing I noted vs 30T looking at reviewer discharge graphs. Early in the discharge curve, they drop off a lot. Until about 1/3 discharged. Then they catch up and pass the 30T. So won’t feel that fire of a freshly charged pack. I’m going 13s on these for that reason.
3 Likes
I think the moli-cells outperform and out cost… but I need that shit…
thinking about a 12s2p… is molicel the answer?
3 Likes
I made a psycho ocd table
3 Likes
Man, Even with the groupbuy the 40T pack I’m getting would be close to the same as the Molicell I was thinking of getting. Still can’t wait
for this 40t pack though!
1 Like
let me know what ya think…
I wanna press the P42a’s into service and make them work…
I could do 40T but then the next year I’d wonder…
at least now I’ll know
1 Like
Gimme 4 weeks and it should be rolling…
I think the near future/next year people are gonna go p42
Even though it’s only a .2ah and 5amp discharge difference from my findings
(Although it’s rated for 45a discharge it’s is really only 25 continuous, 30 under 100°c and above that it gets sketchy)
2 Likes
Would you share the link of that curve?
Has anyone used the P42a cells with NESE 21700 modules? Do they fit? @Agniusm ?
EDIT: nevermind I should search before asking.
Looks like they fit: Any p42a cell users out there?
2 Likes
The 2nd graph shows vs other cells at 10a and 30a draw.
https://www.e-cigarette-forum.com/attachments/ac0bc709-98a9-4496-b721-6f119abd3508-jpeg.806175/
1 Like
I hope… Because I have just finished up printing 20 pcs 6p NESE modules, for 21700 molicels p42a 
2 Likes
They fit 
3 Likes
It seems the 30T are king between 100%-85% EOC by a lot, 40T are average discharge and range wise and P42A have really low sag and last way/way longer than any of the Samsung variations.
I’m convinced I made the correct choice by going P42A
I’m building a 12S4P for the Sportster
13 Likes
can confirm, i have 12s4p p42a in nese 21700 modules
4 Likes
How do you like them so far ??
2 Likes
i like them a lot although i’ve had them for a few months havent had enough ride time to have a fully developed opinion yet. So far they appear to be performing as advertised.
2 Likes
im going with your enclosure for my evo build with p42a 12s4p the limit you can fit single stack
1 Like
For what enclosure and deck?