Hi, guys instead of creating multiple topics for each product we decided to make one central topic for all products.
Gear Drives
FatBoy SS Mini Gear Drive V4 for FatBoy 240/260 Trucks
FatBoy SS Mini Gear Drive for FatBoy 240/260 Trucks. This version is all milled gears in-house using outer-gear style gearing with much higher tooth size for hardcore power delivery. This kit does not require any alteration to the hanger.
New all aluminium EN AW-6082-T651 gear drive with aluminium /plastic gears, V-ring and other improvements.
This is a pre-assembled gear drive for ease of use and possibility to ride as soon as possible!
Comes with pre-set gear meshing and initial angle (15 deg, front side). Angle can be changed before putting this setup on the deck, (6 total positions).
Angle adjustment is not threadlocked. It is not necessary, but recommended to use a bit of threadlocker after setting up wanted angle.
Every other drive train screw is initially threadlocked.
All bearings are pressed in using a thermal press method, not press-fit, especially not foot press-fit.
All bearings are pressed into Aluminium.
Bearing differences:
- Straight cut gear drives use groove ball bearings.
- Helical gear drives use angular contact ball bearings to sustain the axial loads.
Gear types and materials:
- Wheel gear is machined from plastic (harder than POM, equivalent to aluminium hardness).
- Wheel adapter is aluminium.
- For straight-cut gears: motor gear is aluminium.
- For helical gears: motor gear is steel.
The kit comes with custom CNC machined wheel hubs with a negative offset to make them fit on normal longboard trucks. Other wheel hubs do not work as these also have a special mounting plate which reduces total width of the drivetrain.
Tyre Compatibility:
| 3.75" | 125mm Gummies, 6.5", 7", 8" from Trampa/MBS tires and some other tires like 200x50 |
| 2.9" | Nylon 6x2 Tires from AliExpress |
| Bergmeister | Bergmeister tires 5,7x1,7 |
Motor Compatibility:
| FatBoy 240 | 6350, 6355, 6360, 6365, 6374 |
| FatBoy 260 | 6350, 6355, 6360, 6365, 6374, 6380, 6384, 6396 |
Types:
| Gear Type | Gear Ratio | Motor Axis |
|---|---|---|
| Straight | 1:3 | 8mm |
| Straight | 1:2.6 | 8mm |
| Straight | 1:3 | 10mm |
| Straight | 1:2.6 | 10mm |
| Helical | 1:3 | 8mm |
| Helical | 1:2.6 | 8mm |
| Helical | 1:3 | 10mm |
| Helical | 1:2.6 | 10mm |
Using Maytech motors or other motors with axle length <=25mm doesn’t require cutting off the motor shaft!
Easy steps to assemble:
- Add thread lock (Loctite 648) on the motor shaft, insert the key into the keyway slot.
- Push the motor shaft with the key into the drive gear, screw the motor to the mount.
- Liberally add the provided grease after everything has cured.
- Close the gear drive.
- Mount it on the baseplate.
- Ride and enjoy!
Pre-Assembled Kit Contains:
- 2 x Motor spur gear (for 10mm/8mm shaft)
- 2 x Wheel Gears
- 2 x Hanger mount adapters
- 2 x Baseplates with the motor mount holes
- 2 x Gearbox Aluminium covers
- 2 x V-Ring
- 4 x FatBoy Solid Core Hub with custom ET made for this kit
- Screw kit
- Gear lubrication
- 2 x FatBoy 240/260 Hanger (Compatible with Caliber II Baseplate or our adjustable baseplate which you can purchase from here)
Whole gear drive weighs 2000g.
Wheel hubs come anodised in black!
Motor and tires are not included in the kit!
After purchase will be shipped within a 3 week period
Price: from €460.00 + VAT (where required) + Shipping
FatBoy Mini Urethane Gear Drive V4 with FatBoy Hanger
FatBoy Mini Urethane Gear Drive for ABEC wheels or Kegel wheels for FatBoy 240/260/275 Hanger which fits FatBoy / Caliber II Baseplate.
This is a pre-assembled gear drive for ease of use and possibility to ride as soon as possible!
Comes with pre-set gear meshing and initial angle (15 deg, front side).
Angle can be changed before putting this setup on the deck, (6 total positions).
Angle adjustment is not thread locked. It is not necessary, but recommended to use a bit of thread locker after setting up wanted angle.
Every other drive train screw is initially thread locked.
All bearings are pressed in using a thermal press method, not press-fit, especially not foot press-fit.
All bearings are pressed into Aluminium.
Bearing differences:
- Straight cut gear drives use groove ball bearings.
- Helical gear drives use angular contact ball bearings to sustain the axial loads.
Gear types and materials:
- Wheel gear is machined from plastic (harder than POM, equivalent to aluminium hardness).
- Wheel core adapter is aluminium.
- For straight-cut gears: motor gear is aluminium.
- For helical gears: motor gear is steel.
Motor Compatibility:
| FatBoy 240 | 6350, 6355, 6360, 6365, 6374 |
| FatBoy 260 | 6350, 6355, 6360, 6365, 6374, 6380, 6384 |
| FatBoy 275 | 6350, 6355, 6360, 6365, 6374, 6380, 6384, 6396 |
Types:
| Gear Type | Gear Ratio | Motor Axis |
|---|---|---|
| Straight | 1:2.4 | 8mm |
| Straight | 1:2.4 | 10mm |
| Straight | 1:2.6 | 8mm |
| Helical | 1:2.4 | 8mm |
| Helical | 1:2.4 | 10mm |
| Helical | 1:2.6 | 8mm |
Using Maytech motors or other motors with axle length <=25mm doesn’t require cutting off the motor shaft!
Easy steps to assemble:
-
Add thread lock on the motor shaft, insert the key into the keyway slot.
-
Push the motor shaft with the key into the drive gear, fasten the motor to the mounting plate.
-
Add thread lock (Loctite 648) on the motor shaft, insert the key into the keyway slot
-
Liberally add the provided grease after everything has cured.
-
Close the gear drive.
-
Mount it on the baseplate.
-
Ride and enjoy!
Pre-assembled Kit Contains:
- 2 x Motor spur straight or helical gear (for 10mm/8mm shaft)
- 2 x Wheel Hubs with straight or helical gear
- 2 x Kegel/ABEC wheel hub mounts
- 2 x Hanger mount adapters
- 2 x Baseplates with the motor mount holes
- 2 x Aluminium Gearbox covers
- 2 x FatBoy 240/260/275 Hanger (Compatible with Caliber II Baseplate or our adjustable baseplate which you can purchase from here)
- Screw kit
- Gear lubrication
Wheel hubs come anodised in black!
Motor and wheels are not included in the kit!
After purchase will be shipped within a 3 week period
Price: from €440.00 + VAT (where required) + Shipping
FatBoy SS Drive HD
FatBoy SS Drive HD for MBS Metal Matrix II Trusk and Trampa Vertigo - Infinity ATB Truck - the new HD gear drive from 3DServisas featuring thick gears and reinforced design new materials Aluminium EN AW-6082-T651 and better efficiency and durability of the gear system.
Features
- Out of the box support for 63mm motors .
- Aluminium reinforced wheel spur gear, a lot sturdier truck mounting system.
- New Black colour casing from a new material which his highly durable scratch and impact resistant with sound dampening properties
- New lubrication system which utilizes small volume inside gear drive which allows more efficient lubricant usage
- The motor spur gear is now locked with a keyway which stops all gear slippage on the motor shaft.
- Laser Cut Stainless Steel protection plate for smooth v-ring operation.
- Ultra Slim Design with a total height of 119mm (4.69")
- No modifications required for the trucks plug and play.
- MBS trucks - Maximum motor size: 63mm diameter and 84mm length.
- Trampa trucks - Maximum motor size: 63mm diameter and 100mm length.
Kit Contains
- 2 x Baseplates
- 2 x Hanger mount adapters (Three positions -15º, 0º, +15º)
- 2 x Black Gear Drive Covers
- 2 x Aluminium Motor Spur Gears
- 2 x Wheel Spur Gears
- 2 x Wheel Spur Gear Reinforcement plates
- 2 x Wheel Mount Plates (Trampa SuperStar / FatBoy Solid Core Hubs)
- 2 x Stainless steel protection plates
- 2 x V-Rings
- Screws and Accessories
- Gear lubrication
Whole kit weights 1480g.
Motor and wheels are not included in the kit!
After purchase will be shipped within a 3 week period
Price: from €299.00 + VAT (where required) + Shipping
FatBoy SS Drive - Heavy Duty Gear Drive
FatBoy SS Drive for Trampa Vertigo - Infinity ATB Truck - the new heavy duty gear drive from 3DServisas featuring thick gears and reinforced design new materials Aluminium EN AW-6082-T651 and better efficiency and durability of the gear system.
Features
- Out of the box support for 63mm and 80mm (including 80100) motors featuring new rail-based gear mesh adjustability system.
- Aluminium reinforced wheel spur gear, a lot sturdier truck mounting system.
- New RED or Black colour casing from a new material which his highly durable scratch and impact resistant with sound dampening properties
- New lubrication system which utilizes small volume inside gear drive which allows more efficient lubricant usage
- The motor spur gear is now locked with a keyway which stops all gear slippage on the motor shaft.
- Laser Cut Stainless Steel protection plate for smooth v-ring operation.
- Ultra Slim Design with a total height of 119mm (4.69")
- No modifications required for the trucks plug and play.
Kit Contains
- 2 x Baseplates
- 2 x Hanger mount adapters (Three positions -15º, 0º, +15º)
- 2 x Motor Mount Plates
- 2 x RED or Black Gear Drive Covers
- 2 x Aluminum Motor Spur Gears
- 2 x Wheel Spur Gears
- 2 x Wheel Spur Gear Reinforcement plates
- 2 x Wheel Mount Plates (Trampa SuperStar / FatBoy Solid Core Hubs)
- 2 x Laser Cut Stainless steel protection plates
- 2 x V-Rings
- Screws and Accessories
- Gear lubrication
Motor and wheels are not included in the kit!
After purchase will be shipped within a 3 week period
Price: from €400.00 + VAT (where required) + Shipping
Trucks
FatBoy Solid CNC Machined Hanger
A fully CNC machined Aluminium EN AW-6082-T651 FatBoy 230/240/260 Hanger for Caliber II Baseplate and 260 for heXL Baseplate with titanium 8mm diameter length 51mm axles. Compatible with FatBoy gear drives.
FatBoy Hanger weights 300 g.
Hanger profile dimension :
Height - 19,70mm , Width - 18,10mm , Radius 3,00mm .
Sizes:
| Width | Fits |
|---|---|
| 230 | FatBoy Adjustable Baseplate / Caliber II Baseplate |
| 240 | FatBoy Adjustable Baseplate / Caliber II Baseplate |
| 260 | FatBoy Adjustable Baseplate / Caliber II Baseplate |
| 260 heXL raw | heXL Baseplate |
The price is for ONE hanger only !
After purchase will be shipped within a 1-2 week period
Price: from €60.00 + VAT (where required) + Shipping
FatBoy Adjustable Baseplate
A fully CNC machined Aluminium AW-6082-T6 FatBoy adjustable angle 35-55° baseplate. Fits: FatBoy 230, 240, 260, 275 hangers and Caliber II Hangers
Includes:
- 1 x FatBoy Adjustable Baseplate
- 1 x RipTide WFB Pivot Cups 96a
- 2 x RipTide KranK Barrel Bushings 90a
- 1 x Large Cup Washers
- 1 x Stainless Steel Washers, Small
- 1 x Kingpin Zinc Yellow-Chromate Plated Hex Head Screw, Grade 8 Steel, 3/8"-24 Thread, 2-1/2" Long
- 1 x High-Strength Steel Thin Nylon-Insert Locknut, Grade 8, Zinc Yellow-Chromate Plated, 3/8"-24
FatBoy BasePlate weights 290 g.
After purchase will be shipped within a 2-3 week period
Price: from €64.00 + VAT (where required) + Shipping
FatBoy X LCD Plate Longboard Trucks Braket with Battery Monitoring LCD
A 3D CNC Machined Aluminium EN AW-6082-T651 FatBoy X Plate a longboard truck bracket with battery monitoring LCD screen.
Specifications:
- Waterproof
- Up to 15S Li-ion Battery capacity meter programable
Includes:
- 1 x Bracket with LCD
Price: from €50.00 + VAT (where required) + Shipping
FatBoy X Plate Longboard Trucks Braket
CNC machined Aluminium EN AW-6082-T651 FatBoy X and bracket for long truck.Height is 6mm (0.24")
Colors:
- Black
- Red
Includes:
- 2 x Bracket
Price: from €15.00 + VAT (where required) + Shipping
FatBoy 35 Solid Riser adapter for Trampa, MBS, Longboard trucks
A FatBoy 35º Solid Riser adapter of Aluminium 6082-T6 for mounting mountain board trucks to normal longboard decks.
Includes:
- 2 x FatBoy 35º Solid Riser adapter
Works with:
- Trampa Trucks
- MBS Trucks
- Longboard Trucks (New / Old School)
Price: from €120.00 + VAT (where required) + Shipping
Regarding USA tour maybe in the future, I guess