3D printables for esk8

Skunk · May 28, 2019, 5:14pm

Maybe? They work good as a lip for a minimalist handle

mikenyc · May 28, 2019, 5:16pm

Alien used to make these, but it seems that they’ve stopped. If there’s enough interest, I’ll try to crank it out next weekend.

dani · May 29, 2019, 1:33am

I’ll add my stuff, enjoy.

Fishhook remote - mini remote mod to make it thumb controlled and much more ergonomic:
https://www.thingiverse.com/thing:3363745
Bindings for esk8. We are still looking for a name:
https://www.thingiverse.com/thing:3619398

Dani

RedBaron · May 29, 2019, 9:52pm

Here is my version of a flipsky dual 6.6 original external enclosure. See thingiverse notes for more info.

And this is a dampener I made to be used with Evolve Supercarve DKP trucks. This helps give feedback to the 2nd kingpin (swing arm) while turning or carving to reduce wobbles at higher speeds and provide a smoother range of travel while also protecting the underside of your deck from hardware digging into it.

BigBen · May 29, 2019, 10:26pm

I made a jig to hold 3 21700 cells for welding. I printed a couple so I could put one on each end.

mishrasubhransu · May 30, 2019, 1:34am

I have made a separate thread for CAD requests: 3D files / CAD request thread.

Please use it if you feel final submission and request thread should be different.

mishrasubhransu · May 30, 2019, 1:35am

mishrasubhransu · May 30, 2019, 2:22am

https://drive.google.com/drive/folders/0B1q9GisJy4tHN1JiSlZubmVpaUk?usp=sharing

L3chef · May 30, 2019, 2:52pm

Trying to design something to place my xt60 chargplug and led push button. Best plase to mount them on my build is on top of tb218 base plate (flushed drop thrugh)… This is what I camed up with.

Thoughts?

RedBaron · May 30, 2019, 5:16pm

Looks nice, how does it mount? I would consider a snap on solution over using the existing holes and hardware on the baseplate.

L3chef · May 30, 2019, 5:40pm

I have a few different ideas… Might just go with double sided tape… I’ve used it before on led displays etc. Works very well.

bonesaw · June 1, 2019, 11:32pm

Just finished this footstop, took it for a test ride and it’s great. Probably the only person that can use it as-is is @IDEA since my board is modeled after his lol (Restless Mantis deck on Evolve trucks).

Still, I think it’s a kinda clever mounting system, feel free to copy or modify it.

https://grabcad.com/library/skateboard-foot-stop-1

magharees · June 2, 2019, 12:48pm

Like that, thanks for the share

yelnats8j · June 3, 2019, 10:31pm

Fixed the small problem should be all good now.

Lee_Wright · June 11, 2019, 3:22pm

So I ordered some filament to experiment with. Ignore the PLA, that’s for another project

Has anyone used ASA before? Sounds like a promising material. Have never tried the fusion+ ABS before and also I got some CF stuff

mmaner · June 11, 2019, 3:52pm

This is my offset model for Psychotiller 6 Shooters. It replaces the pulley section that would normally be flipped to create the offset.

mmaner · June 11, 2019, 3:58pm

This model is the jig I use for gluing 18650 cells. I have used it for welding as well.

Skunk · June 11, 2019, 4:00pm

Hopefully ill need one soon

mmaner · June 11, 2019, 4:05pm

This is my Pocket Voltmeter with Pass-Through port. I am using a 2.1mm port but you could easily use a 2.5mm as well.

DJ4se · June 14, 2019, 10:36pm

If you guys want to learn how to design something yourself on fusion 360 then go through this guys tutorials. They can be a bit slow but if you’re a complete noob at cad that’s probably a good thing.

Also if you claim as a student or independent as a non commercial user of 360 you can get it absolutely free.