On the real, I’m super busy and will likely forget about this request. If I don’t make the file within the next 2 days, you have 100% permission to yell at me as a reminder.
LETS GO TEAM!
Matrix 2 -5 degree riser Improved.STEP (112.1 KB)
Matrix 2 -5 degree riser Improved.STL (85.1 KB)
Matrix 2 +5 degree riser Improved.STEP (112.2 KB)
Matrix 2 +5 degree riser Improved.STL (84.9 KB)
@dskate files are fixed!
I think this is still a negative 5 degree riser or am I crazy?
Anyone have bottom profile and more importantly mounting hole spacing for a Ubox v1?
Thanks! really appreciate it.
I don’t know if the hole mounting pattern is accurate or not; the file is not mine.
Either way, hope it helps.
It should be. I used that to create an enclosure for that esc.
And just to pile it on… when you remake the front 5’ wedge, could you design it without the cutout in the middle?
Thanks a bunch!
The +5 file is remade and linked above but I’ll make a version without the cutout later today.
Matrix 2 -5 Degree Riser No Cutout.STEP (95.9 KB)
Matrix 2 -5 Degree Riser No Cutout.STL (71.5 KB)
Matrix 2 +5 Degree Riser No Cutout.STL (71.5 KB)
Matrix 2 +5 Degree Riser No Cutout.STEP (96.0 KB)
Enjoy fam
Someone make me add cable channels next
Thanks yo!
Heyoo, does anone have a good file from an evolve/mbs/trampa wheel hub? I know these are not the same aa eachother, so all files are welcome as long as they are dimensionally accurate.
stl bad
3mf for life
I think ive seen these, do you know if this is an accurate file?
I’ve used it to build some stuff. I do t own the product so I don’t know how well it matches up. It’s a 200x50mm wheel so that much is accurate. You can try downloading it and checking the dimensions against the CAD drawing on MBSs website.
In case anyone is interested, I modelled up the Haggboards Bergmeister hubs. Will do the tyres shortly.
Bergmeister Hub v1.step (261.3 KB)
Insomnia is a bitch
Edit: Added Tyre and 60T pulley
Bergmeister Wheel and 60T Pulley v3.step (988.5 KB)