Yup!!! I’m going in!!!
First, shout-out to @bboybowzer and the Teal Dadbod
Next, full disclosure: I’m the Head Ambassador at @hoytskate (HMU for deals!!)
I had to do some things I won’t mention for @DuckBatterySystems to get this …
So it’s a Hoyt UAV Dadbod built by Hoyt.
Chocolate stain
Hoyt Puck - purple
44mph
7" Hoyt tires & hubs
190kv 3400W 100A Motors
16s9p 2017Wh Molicel P42A Battery
Special sauce
Customizations:
Purple glitter griptape
Custom logo on the belly
Stage 1:
Stage 2:
Cute ass reel:
Stage 3:
YouTube Complete Video:
25 Likes
Evwan
November 9, 2023, 3:31am
#2
Hot as fuck
Purple titanium screws for the bottom deck!
6 Likes
Yaaaaaaaaaaasssss moar purple is on the way
3 Likes
Griptape is awesome, and the deck color is great as well. Very nice.
1 Like
Yaaassssss… there are things in the works
3 Likes
Also, @DougM you can’t have a Chocolate & Purple Glitter Unicorn Dadbod
2 Likes
DougM
November 9, 2023, 3:55pm
#9
Hold my beer.
I used glitter in the epoxy on the test bigfoot, but I haven’t polished it up to see how it looks. I still need to dye the wood first.
Woodcraft has a lot of glitter colors
1 Like
Ok pervs, get you lube and rags ready because ya gonna need it!!!
So I sent my 7" hubs off…
Wow!!!
Fuck me!!
painted the bronze valve stems purple
purple anodized unicorn valve stem caps
purple tire lettering paint
shredlights FX+ & sl300+
TPU nose guard by @jack.luis
Fuck yeah!!!
Clean up!!! Isle 69!!!
13 Likes
Bookmarking company name for later - how much did it cost ya?
2 Likes
Expect 3-4 weeks approx for the process. This set was a learning experience for them. It was $150 plus shipping for anodizing and polishing. Future sets will probably start at $200 depending on options, plus shipping.
4 Likes
This is so pretty, maybe you can try not to break this one!!!
Video of the journey so far:
12 Likes
Was there any noticeable change in bearing fitment after anodizing? Anodized layers aren’t very thick, but hub mfgs usually CNC the bearing pockets after anodizing to ensure a precision bearing fit.
1 Like
Nothing noticable. Most went in with a light press, a couple pushed in easily by hand without the press
1 Like
So, as seen above, I added fenders, designed by @jack.luis , I printed them with filament swaps to add rally stripes purple on black to match the whole motif
Also, added some dope lights that Jackson also sent
9 Likes
Oh man I gotta send you the ones with the angles fixed. I tried to make them not blinding and definitely overdid it
2 Likes
