I NEED MONI
Located in New York City (US)
Local pickup is available.
I’ll keep updating this thread with shit that I need gone.
Prices don’t include shipping unless stated otherwise.
2x 190-200kv 6355 sk3 motor - $50
Not sure what exact KV these motors are. My math puts them at about 190-200kv. They had sensors, but the wire disintegrated You can just solder new wires to the sensors.
The motors arent prefect. They spin up just fine, however I believe that one of them needs a new c-clip. They’re cheap because I want em gone. The only thing I guarantee here is they spin up and work electrically, but they need some work to be fully usable.
6" recommended because they come with 62T pressfit pullies. In the pics I have 8" knobbies on there for the hell of it. I’ll clean em up before I ship em ofc. JUST THE HUBS/PULLIES.
Will sell these if they don’t sell as a bundle with the BN270 hangers.
I have 8 brand new 10x28 bearings with MBS spacers (for MBS/trampa hubs) $15
10 10x22 bearings with thane/small hub spacers, though these have like 100ish miles on them. Idk what to sell these for lol
BN270 + Motor mounts - $130
Pretty good shape. One of the motor mounts is brand new and the other one is a bit banged up. One is the older one with the slide adjustment and the other one has the hole adjustment. The hangers are in great shape. 10mm fixed axles. 10x22 and 10x28 bearings with bearing spacers available.
the pullies you gave me didnt fit my stuff
the d shaft were 8mm not 10 and the abec pullies are only 12mm wide
i keep those kegel pullies tho, the ones I’m selling rn are diff
You can just solder new wires to the sensors.
$25 for the pair
