ChooChoo #1 and Omakase are gone… it’s time to sell the remainings from the past.
Also some goodies for free… just pay shipping and its yours.
.
2x Boardnamics press-fit pulley: 2x 40T + 2x Abec adaptors
- Description: Used around 200km. Really good condition as expected, not crashed anywhere nor even broken a belt.
- Price: 20€
Images
.
8x 290x15mm | 4x 265x15mm | 1x 265x12mm | 1x 255x12mm belts
- Description: New, never used.
- Price: 1€ each
.
4x black | 4x raw alu motor pulleys
- Description: Half new, half used, 14T/16T 8mm shaft 15mm width.
- Price: 1€ each
Images
.
2x LM2596HVS step-down converter
- Description: New, never used.
- Price: FREE
.
Various chinesium XT90><XT60 adapters
- Description: New, never used… but check solder joints before using.
- Price: FREE
.
2x Voltage displays
- Description: New, never used.
- Price: FREE
.
Enertion Nano-X
- Description: Faulty, losses signal from time to time… dangerous but maybe someone can fix it.
- Price: FREE
.
.
Parts to be shipped from Madrid (Spain) and shipping costs excluded, to be calculated and added upon purchase.
Payment via Paypal only. If you use “goods” please add 3% of total cost for the transaction, otherwise mark it as “f&f” for no extra cost if you trust me.
Please let me know if you want too see any other pictures or to know more details of any part! 
.
.
.
.
SOLD
SOLD
.
10x Cables with bullets to route through the deck
- Description: New, never used.
- Price: FREE
.
Elephant antispark switch from @okp
- Description: New, never used.
- Price: FREE
.
2x Boardnamics 220mm black hangers
- Description: Used, with minor scratches but good condition overall. No hardware provided.
- Price: 35€
Images
.
2x Whooshboards Mounts
- Description: Used around 600km. Scratched mainly on pulleys’ side, but good condition overall. They come with 2x idler tensioners each. Really thick and solid.
- Price: 50€
.
2x Focbox 1.7 + 3DServisas dual heatsink
- Description: Focbox are new and never used, rare parts nowadays.
-
Price: 200€
.
.
3DServisas FatBoy Mini Urethane Helical v5 geardrive 1:2:6 + 3d printed protectors
- Description: New, just used few km for testing purposes (few minor scratches at the bottom). Comes with spare grease and all required hardware. Raw aluminium.
-
Price: 300€
.
2x Turnigy 6354 140kv sensored NEW + 1x Turnigy 6354 140kv non-sensored + 1x broken Turnigy 6354 140kv for parts - Description: 2 new + 1 used + 1 broken (the can slide-out, not sure what is broken). All with MR60 connectors and braided wires.
-
Price: 125€
.
Refurbished and painted + clear varnished eskating.eu enclosure
- Description: Enclosure I had laying around from my beginnings as DIYer which resulted in a disaster full of shitty holes all around. Every hole has been sealed with epoxy and it has been shortened so final measures are 38x20,5x3,5cm (I have to apply cloth + epoxy to bottom side to prevent cracking, so it will take some days to be finished).
-
Price: 40€
.
.
esk8.news Universal Heatsink
- Description: New, never used, few little scratches from handling over.
-
Price: 40€
.
.
Jessup griptape for 2 decks
- Description: New, never used, just took some pieces to replace an old griptape. Really strong, will measure exact size if someone is interested.
-
Price: 10€
.
.
#Choovid19 part-out set #1: deck + enclosure + telemetry
- Items
| Condition | ||
|---|---|---|
| Deck | ChooChoo #1 (first deck made after the original, this one was used to make the enclosure molds so… you get an absolute legend) | |
| Enclosure | BigBen for ChooChoo #1 (first enclosure made from the mold for this deck) | |
| Telemetry | Davega X | New |
| Robogotchi + GPS module | New |
- Description: Please check build thread for full details and pictures.
- Price: 500€
.
#Choovid19 part-out set #2: focboxes + heatsink
- Items
| Condition | ||
|---|---|---|
| ESC | Dual Focbox | |
| Heatsink | FatBoy DualFocbox heatsink |
- Description: Please check build thread for full details and pictures.
- Price: 200€
.
#Choovid19 part-out set #4: remote + receiver
- Items
| Condition | ||
|---|---|---|
| Remote | Puck Puck Bruce + nubbed throttle + receiver | New |
- Description: Please check build thread for full details and pictures. Charged only twice, used for testing.
- Price: 130€
.
Torqueboards TB110 78A black
- Description: New, just used few km for testing purposes.
-
Price: 130€
.
.
BKB HM-10 bluetooth module
- Description: Well used, working fine, never failed.
-
Price: 5€
.
.
Hangers - 3DServisas FatBoy CNC raw ALU 240mm SurfRodz profile
- Description: Used but in really good condition.
-
Price: 160€
.
.
Adjustable baseplates - Hammock for SurfRodz
- Description: New, just used few km for testing purposes. Anodised aluminium.
-
Price: 120€
.
.
2x Caliber II hangers
- Description: Just 2 used Caliber II hangers, not very damaged.
-
Price: 10€
.
.
5x 1/4 + 2x 1/2 soft red risers
- Description: New, never used. There are also another 2 with a hole to hold a XT90 under a baseplate.
-
Price: 2€ each
.
.
2x XT-60 parallel connectors
- Description: New, never used. Chinesium quality.
-
Price: 1€ each
.
.
XT-90 split for antispark loopkey
- Description: New, never used. Chinesium quality.
-
Price: 3€
.
.
2x Unik Boards 6354 170kv motors
- Description: Used around 600km, bought from Okp. They are vinyled in carbon fiber + nicely wrapped wires + MR60 connectors. Minor scratches, really good condition. Worked great so far.
- Price: 45€ each / 80€ both
Images
.
2x Trampa Vertigo Mini motor mounts
- Description: New and never used, from Okp. No hardware provided, just the mounts in the pic.
- Price: 10€
fuck maths 
