Why is there no VX1 Disconnection thread.

[fessyfoo]

for those with disconnect issues are they in RF dense areas?

i’ve mostly been using the VX1 for several thousand miles and have never had a disconnect issue. Though I did have some other issues.

VX1 remote potentiometer wire broke.

Today my board just didn’t work. Turns out the remote was stuck in full brake/reverse. when paired it was sending a full reverse signal to the vesc. when unpaired back to neutral. pairing a different remote worked as expected. opened it up and observed the red wire to the potentiometer had just failed. glad this didn’t fail this way while riding. it would have hard locked the brakes. and in current mode hard locked reverse. [image] [image] shakes my confidence in this remote th…

Flipsky VX1 strange hesitations.

I had this problem for a long while where I had a slight hesitation when braking at low speed. at one point it was also on acceleration after braking. and it would sometimes feel like two pulses of hesitation. VX1 in in PPM mode. i debugged on various false trails of thinking it was my pulley slipping one direction and the other against the keyway. Thinking it was related to funky erpm limits I had tried. and sometimes it would go away and I’d think i fixed it. I would try to watc…

I may tie this second one to the original problem.